• What is an mass air flow sensor
  •   The Mass Air Flow (MAF) sensor measures the amount of air flow entering the intake manifold using a heated grid or wire. The PCM uses this signal primarily for fuel control.
  •   Please replace the air flow sensor according to manufacturer's recommendations based on mileage. And keep the inside of the air filter box very clean, and be sure the ducts between the air filter box and the throttle body are all securely clamped and airtight. 
  •  
  • The function of mass air flow sensor
  • MAF Meter Mass Air Flow Sensor For 01-05 Dodge Stratus Mitsubishi Eclipse L4 V6

    What is an mass air flow sensor

      The Mass Air Flow (MAF) sensor measures the amount of air flow entering the intake manifold using a heated grid or wire. The PCM uses this signal primarily for fuel control.

      Please replace the air flow sensor according to manufacturer's recommendations based on mileage. And keep the inside of the air filter box very clean, and be sure the ducts between the air filter box and the throttle body are all securely clamped and airtight. 

     

    The function of mass air flow sensor

      A mass (air) flow sensor (MAF) is used to find out the mass flow rate of air entering a fuel-injected internal combustion engine. 
    (To measure all the air flowing into the engine)

     

    How to replace an mass air flow sensor

      1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
      2. Install sensor to air duct seal(s), if so equipped, on the replacement MAF sensor.
      3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
      4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary. (NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.)
      5. Carefully plug the harness connector lead into the MAF sensor.

     

    Package included

    1X Brand New Mass Air Flow Sensor/Meter

     

    Compatibility:

    2000-2005 Mitsubishi Eclipse 3.0L 2972CC 181Cu. In. V6 GAS SOHC

    2000-2005 Mitsubishi Eclipse 2.4L 2351CC l4 GAS SOHC

    1999-2003 Mitsubishi Galant 3.0L 2972CC 181Cu. In. V6 GAS SOHC

    1999-2003 Mitsubishi Galant 2.4L 2351CC l4 GAS SOHC

    1999 Mitsubishi Montero Sport 2.4L 2351CC l4 GAS SOHC

    1999-2003 Mitsubishi Montero Sport 3.0L 2972CC 181Cu. In. V6 GAS SOHC

    2001-2005 Chrysler Sebring 3.0L 2972CC 181Cu. In. V6 GAS SOHC Coupe

    2001-2005 Chrysler Sebring 2.4L 2429CC 148Cu. In. l4 GAS DOHC Coupe

    2003-2005 Chrysler Sebring 2.7L 2700CC 167Cu. In. V6 FLEX DOHC Coupe

    2001-2005 Chrysler Sebring 2.7L 2700CC 167Cu. In. V6 GAS DOHC Coupe

     



    Payment

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

     

    • Instant Paypal payment is the preferred method of payment.
    • We will only ship to the confirmed Paypal shipping address given with the payment.
    • We do not offer local pickups.
    Shipping

    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.

    3. The images shown are not the actual item and are for your reference only.

    4. Fast shipping:All our packages use USPS Package Service

    5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    Returns

    1. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    4. Return shipping is to be paid by the Buyer.

    Contact Us
    • We are always been trying to provide best service and reliable products for every customer.
    • If you are satisfed with the product you recieved,please leave us positive feedback.
    • If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback.We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you.

    Shop Category
    Picture
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    MAF Meter Mass Air Flow Sensor For 01-05 Dodge Stratus Mitsubishi Eclipse L4 V6

    What is an mass air flow sensor

      The Mass Air Flow (MAF) sensor measures the amount of air flow entering the intake manifold using a heated grid or wire. The PCM uses this signal primarily for fuel control.

      Please replace the air flow sensor according to manufacturer's recommendations based on mileage. And keep the inside of the air filter box very clean, and be sure the ducts between the air filter box and the throttle body are all securely clamped and airtight. 

     

    The function of mass air flow sensor

      A mass (air) flow sensor (MAF) is used to find out the mass flow rate of air entering a fuel-injected internal combustion engine. 
    (To measure all the air flowing into the engine)

     

    How to replace an mass air flow sensor

      1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
      2. Install sensor to air duct seal(s), if so equipped, on the replacement MAF sensor.
      3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
      4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary. (NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.)
      5. Carefully plug the harness connector lead into the MAF sensor.

     

    Package included

    1X Brand New Mass Air Flow Sensor/Meter

     

    Compatibility:

    2000-2005 Mitsubishi Eclipse 3.0L 2972CC 181Cu. In. V6 GAS SOHC

    2000-2005 Mitsubishi Eclipse 2.4L 2351CC l4 GAS SOHC

    1999-2003 Mitsubishi Galant 3.0L 2972CC 181Cu. In. V6 GAS SOHC

    1999-2003 Mitsubishi Galant 2.4L 2351CC l4 GAS SOHC

    1999 Mitsubishi Montero Sport 2.4L 2351CC l4 GAS SOHC

    1999-2003 Mitsubishi Montero Sport 3.0L 2972CC 181Cu. In. V6 GAS SOHC

    2001-2005 Chrysler Sebring 3.0L 2972CC 181Cu. In. V6 GAS SOHC Coupe

    2001-2005 Chrysler Sebring 2.4L 2429CC 148Cu. In. l4 GAS DOHC Coupe

    2003-2005 Chrysler Sebring 2.7L 2700CC 167Cu. In. V6 FLEX DOHC Coupe

    2001-2005 Chrysler Sebring 2.7L 2700CC 167Cu. In. V6 GAS DOHC Coupe

     



    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

     

    • Instant Paypal payment is the preferred method of payment.
    • We will only ship to the confirmed Paypal shipping address given with the payment.
    • We do not offer local pickups.

    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.

    3. The images shown are not the actual item and are for your reference only.

    4. Fast shipping:All our packages use USPS Package Service

    5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    1. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    4. Return shipping is to be paid by the Buyer.

    • We are always been trying to provide best service and reliable products for every customer.
    • If you are satisfed with the product you recieved,please leave us positive feedback.
    • If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback.We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you.

    Copyright of Auto_EngineParts. All rights reserved.