Chisel paste Techmol Reiner System 500g cartridge
Special paste for the lubrication of insert tools and wear bushings of hydraulic and pneumatic hammers. Separation effect of the solid film up to approx. + 1100 ° C. TECHMOL CHISEL PASTE is not a lubricating grease. Under no circumstances may it be used to lubricate roller and plain bearings!
Description: Brown-black aluminum complex soap paste treated with metal powder and solids. Techmol MEISSELPASTE is work-stable, thermally highly resilient and oxidation-resistant. It also stands out TECHMOL CHISEL PASTE is characterized by good water resistance and good corrosion protection.
Marking / qualification: Lubricating grease MF 2 U-20 according to din 51 502 ISO-L-XBGHB 2 acc. ISO 6743-9
Operating temperature range -20 to +1100 ° C
Special paste for the lubrication of insert tools and wear bushings of hydraulic and pneumatic hammers. Separation effect of the solid film up to approx. + 1100 ° C. TECHMOL CHISEL PASTE is not a lubricating grease. Under no circumstances may it be used to lubricate roller and plain bearings!
Description: Brown-black aluminum complex soap paste treated with metal powder and solids. Techmol MEISSELPASTE is work-stable, thermally highly resilient and oxidation-resistant. It also stands out TECHMOL CHISEL PASTE is characterized by good water resistance and good corrosion protection.
Marking / qualification: Lubricating grease MF 2 U-20 according to din 51 502 ISO-L-XBGHB 2 acc. ISO 6743-9
Operating temperature range -20 to +1100 ° C
Technical specifications: | ||||||||
Chem. and physics. Characteristics | unit | Test method | Techmol CHISEL PASTE | |||||
NLGI grade | - | din 51 818 | 2 | |||||
Walk penetration | 1/10 mm | din ISO 2137 | 265 to 295 | |||||
Thickener | - | - | Aluminum complex | |||||
Dropping point | ° C | din ISO 2176 | approx. 250 | |||||
Operating temperature range | ° C | - | -20 to +1100 | |||||
Base oil viscosity at 40 ° C | mm² / s | din 51 562 | approx. 350 | |||||
VKA welding force | N | din 51350-4 | 5000 | |||||
Behavior towards water | - | din 51 807/1 | 0 - 90 | |||||
All information to the best of our knowledge, but without guarantee. Technical data are average values and are subject to normal production fluctuations. |