Motul 7100 4T 10W-60 Motorcycle Engine Oil Fully Synthetic - 2 Litres
100% synthetic 4-Stroke lubricant - Ester Technology - Meets bike manufacturer specifications, especially KTM, HUSQVARNA, MV AGUSTA et MOTO GUZZI which recommend SAE 10W60. Excellent shear resistance protecting engine and gearbox. Smooth shifting. Meets JASO MA2 specifications for optimal wet clutch performance. Suitable for catalytic converters.
Specifications
Performance
Standards - API SN / SM / SL / SJ / SH / SG
Approval - JASO MA2 under N° M033MOT119
Types of use
High performance motorbikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial..fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2 or Euro 3 emission regulation, fitted with exhaust gas after treatment systems : catalytic converters, air injection into exhaust pipe...
Suitable for specific KTM, HUSQVARNA, MOTO GUZZI engines requiring SAE 10W-60 viscosity grade oil.
Other uses: street bikes without catalytic converters, scooters, ATV's, UTV's...
Ester Technology
The innovative anti-wear additives package provides outstanding gearbox protection. FZG Gear Test results: Pass FLS>14. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates fluid lubricating and wear protection properties at the interface of a loaded set of gears. Lubricants are then graded based on their "Failure Load Stage" or FLS rating from FLS 1 (very poor result) up to FLS 14 (outstanding result).
Recommendations
Drain interval: according to manufacturers recommendations and tune to your own use.
Can be mixed with synthetic or mineral lubricants.
Properties
Colour Visual Red
Viscosity grade SAE J 300 10W-60
Density at 20℃ (68℉) ASTM D1298 0.862
Viscosity at 40℃ (104℉) ASTM D445 160.1 ㎟/s
Viscosity at 100℃ (212℉) ASTM D445 23.9 ㎟/s
Viscosity index ASTM D2270 181
Pour point ASTM D97 -33℃ / - 27℉
Flash point ASTM D92 232℃ / 449.6℉
TBN ASTM D2896 8.4 mg KOH/g