A bass restoration processor, also called a bass booster or bass restoration processor, such as GR-BASS has multiple adjustments which allow the user to bring out the ideal amount of bass for their music. Most of the time, they have three types of Bass adjustments: frequency, width, and level.
The frequency adjustment allows you to choose the specific frequencies you would like brought out in your music. This allows you to have complete control over the bass in your system. Width adjustments on bass restoration processors allow you to choose the amount of frequencies that are affected. You can adjust the processor to affect a wide or narrow bandwidth of frequencies around the selected frequency.
For example, if you have set the processor to affect 30 Hz, a narrow setting would only mainly affect that frequency, while a wide setting would affect a large range of frequencies around 30 Hz. Lastly, you can adjust the amount of manipulation for that selected frequency at the selected width, with the level adjustment. If you would like to get the most bass possible, you can crank the level knob up. In addition, you can also turn it all the way down if you would like to. For convenient adjusting of this setting, this knob is usually located on an included bass remote.
Most bass restoration processors are the same, but the GR-BASS is one of the best on the scene of mobile electronic. It has everything you need to improve your bass. You can conveniently adjust the level of the bass with the included Dual Knob Control. It is the best processor for your hard earn money!
Don't spend your money on what people call Epicenter and pay high price for the same or inferior bass enhancer. You need this, your sub is begging for this. I promise you, you will love this.
Product Features:
Bass maximizer and bass restoration processor
Accurately recreates and injects low frequency information back into a signal path
Maximum bass control - Includes a dash mount remote control
Lighted bass restoration display - Output level: 13.5v
Frequency response: 10-100000 Hz output - Balance Input noise rejection: 60 dB
Maximum Input Level: 15V RMS
Maximum Output Level: 13.5V Peak
Frequency Response: 10-100,000 Hz
T.H.D Rating: 0.003%
Signal-to-Noise Ratio: -130 dB
Balanced Input Noise Rejection: >60 dB
Input Impedance: 10,000 ohms
Output Impedance: 150 ohms
Power Supply: high headroom PWM
Power Draw: 150 mA
Recommended Fuse Rating: 3 Amp