Brand: ZOOM
Name: Hydraulic Disc Brake
Pistons: 4 pistons
Direction: Left fron & right rear
Model: HB876
Application: 160mm rotor/180mm rotor
Adapter Specification:
F160-R140/F180-R160
Weight: front=318g back=335g(without rotor)
Size: A pillar74.2mm B pillar=51mm
Tubing length: front=800mm rear=1400mm
Features: Integrated molding oil cylinder
Four pistons

Instructions for use ：

* The brake lever has been filled with oil, no oil filling is required for the first use, and can be installed directly, only after the oil is used up, it needs to be filled with oil

Installation note:

The brake lever has been filled with oil.

【1】Do not Press the brake lever before or during the installation process,which will cause oil leakage, otherwise it needs to be refilled mineral oil. The brake lever can only be press after the brake is fully installed. The oil in the brake lever will flow into the caliper through the oil pipe.
【2】The mold block (brake pad protection block) inside the caliper should not be removed before the brake is installed.When not fully installed, if the mold block is removed, the piston will shift, which may cause oil leakage or the brake piston may not rebound in place