THIS IS AN UPGRADED SUPER HEAVY DUTY  METAL SWITCH WITH WIRES 

PLEASE READ ALL

This listing is for the switch ONLY. The Vitamix machine and knob is Not included. This switch will also fit and upgrade the TNC 5000 series that has the 3-wire soldered plastic switch.

DID YOU PURCHASE YOUR 5300. e310 OR e320 VITAMIX AT COSTCO AND NOW YOUR SWITCH JUMPS ON THE LOWER SPEEDS 1-6? THE SPEED SWITCH IN THE COSTCO MACHINES WAS A LIGHT DUTY PLASTIC AND TYPICALLY WEARS OUT 5+ YEARS DEPENDING ON AMOUNT OF USEAGE. ALSO FITS THE 300 PROFESSIONAL SERIES 

Your original is light duty plastic

...We are the Vita-King...We Know Vita-Mix Parts..

PLEASE READ ALL

THIS IS AN UPGRADED SUPER HEAVY DUTY ALL METAL SWITCH 

(your original is plastic and light duty 

THIS HEAVY DUTY REPLACEMENT SWITCH WILL NOT ONLY TRIPLE THE LIFE SPAN ON YOUR ORIGINAL IT ALSO IS A FINER TUNING SWITCH . SINCE IT IS HEAVY DUTY IT WEIGHS MORE (13 Grams) VS (10 Grams) LIKE YOUR ORIGINAL AND IT IS SMALLER IN SIZE. (smaller but more powerful)

YOUR ORIGINAL DIAL KNOB WILL FIT TIGHT LIKE IT IS SUPPOSED TO. YOU WILL NOT NOTICE THE DIFFERENCE IN LOOKS HOWEVER WHEN YOU USE IT YOU WILL FEEL THE BETTER PRECISION AND SPEED RANGE. 

(low and high will be the same however more finite speeds in-between)

..UPGRADE YOUR MACHINE TODAY AND THIS WILL BE THE LAST TIME YOU HAVE TO REPLACE YOUR SWITCH..

COMES WITH THE WIRES, EASY INSTRUCTIONS,NO SOLDERING

(Tools you will need, 13mm socket,10mm socket, small allen wrench, T-15 star bit, needle nose plier)

 FAST SHIPPING

Please note; only the heavy duty metal switch is listed, all other pictures are for reference only. This switch comes with 3 wires, however some vitamix machines only use 2-wires, this switch will also work. Please follow the included instructions

PURCHASE THIS ITEM FROM A TRUE PROFESSIONAL VITAMIX REPAIRMAN...ME!... TO DATE I HAVE REPAIRED AND SOLD OVER 1000 SWITCHES. 

DOES YOUR OLD SWITCH LOOK LIKE ONE IN PICTURE ? THOSE ARE THE MOST COMMON SWITCHES VITAMIX USES IN THERE 5300, e310 AND e320 MODELS AND PRO 300

 THE SWITCH IN THIS LISTING WILL FIT(it is slightly different, however it locks in and once the cover is installed you cannot tell the difference) AND MOST IMPORTANTLY IT WORKS PERFECT AND WILL LAST .

(please note; some machines have the two wire version which in case this three wire will also work)

ATTENTION...PLEASE CHECK OUT ALL MY ITEMS FOR YOUR VITAMIX MACHINE 

This item was purchased in bulk is BRAND NEW and wrapped in plastic

I HAVE PERSONALLY REPLACED OVER 1000 OF THESE SWITCHES. I HAVE PERFECTED AND NOW ENCLOSED MY EASY MULTI-STEP PROCEDURE SO YOU CAN NOW EASILY REPLACE YOUR VARIABLE SWITCH YOURSELF. VITAMIX WILL CHARGE YOU OVER $100 AND YOU HAVE TO PAY TO SEND YOUR MACHINE TO THEM AND WAIT FOR THE REPAIR AND YOU WILL GET THE ORIGINAL PLASTIC SWITCH.

USA SELLER +14 YEARS...CHECK FEEDBACK...PURCHASE WITH CONFIDENCE.

THERE ARE REASONS WHY SO MANY PURCHASE THIS ITEM FROM US.READ OUR FEEDBACK.

GET THE RIGHT PART,GET REAL AND THE BEST CUSTOMER SERVICE.

 I AM A U.S.A. BORN AND RAISED SELLER. MORE IMPORTANT A REAL VITAMIX PROFESSIONAL REPAIRMAN...SPEND THE CORRECT AMOUNT...GET  THE RIGHT PART  THE FIRST AND LAST TIME...AND OF COURSE...SUPER QUICK DELIVERY

THIS SWITCH COMES WITH THE WIRES, IT COMES WITH EASY INSTRUCTIONS (5-20 MINUTES). ALL YOU NEED IS A FEW BASIC EVERYDAY HOUSEHOLD TOOLS. EASY TO DO (READ MY FEEDBACK)

IF YOUR MACHINE SKIPS ON SPEEDS (NORMALLY 1-5) THEN THIS SWITCH WILL WORK LIKE CHAMP AND MAKE YOUR MACHINE RUN LIKE THE DAY YOU PURCHASED IT.

Please note; when the variable speed jumps from 1-6 its a variable speed switch that needs replacing. When the machine just stays on high it is a circuit board problem

READ OUR FEEDBACK

THERE IS A REASON WHY WE SELL SO MANY OF THESE AND RECEIVE SUCH GOOD FEEDBACK...

THIS KIT COMES WITH EASY STEP BY STEP INSTRUCTIONS. YOUR MACHINE WILL RUN LIKE NEW FOR MANY MORE YEARS.

As a longtime Vitamix demonstrator and repairman, I can tell you the one part that seems to always fail after many years of use on a Vitamix is the variable speed switch on most Vitamix machines.

Does your machine (in the variable speed mode) skip speeds on the lower numbers 1-6?    You need a NEW variable speed switch.

Vitamix calls this switch a " POTENTIOMETER".

If you have it fixed by Vitamix it will set you back $100 and you have to ship the machine back and forth to OHIO.

 Now (with my simple step by step instructions) you can do it yourself for under $35

This listing is for the switch ONLY. The Vitamix machine and knob is Not included.

You will need the following to change the switch out.

Reg. pliers or 1/2"/13mm socket

Small Allen wrench 

T-15 star driver bit