Features:
Specifications:
Input voltage: 6V-12V
Output current: 0.5A
Output line length: about 10cm/3.94inch
Note:
1.Input the power of 6-12v, output two levels of terminal can produce
1.5cm length purple high temperature arc, instant ignition paper,
single high voltage line can also discharge of any metal body,
working without a crack sound.
2.On the input power: 3.7-v lithium battery can be used in series, such as 18650 battery, idle cell phone battery (to
remove the protection board, recommended capacity above 2000mAh) or
Nickel-cadmium/Nimh battery pack, 4V or 12V lead Acid batteries(12V battery works best)
Module Usage Precautions:
1. Avoid power on when No load. You must adjust the appropriate distance for high-voltage terminal before power on, high-voltage line arc distance is proportional to the battery voltage and capacity.
2. The test arc distance from the short to long
experimental, It is prohibited exceed the maximum arcing distance(<1.5cm,1cm is OK). Otherwise, energy can not be released due to high voltage, easily damaged modules.
3. The module power, the internal is not easy for heat dissipation, so
it can not work for a long time.
4.To determine whether the battery capacity can drive
the maximum output power is the way to measure the battery
voltage when in the arc state.
5. Small capacity series lithium battery is 7.2 V, voltage will drop to about 4V when arcing,
the
smaller the capacity, the lower the voltage will become. It is
recommended to use above 2000MA lithium, it is better to choose above
4000MA battery.
1 x High Voltage Pulse Generator
Note:
1.The power time is not above 20 seconds each time.
Since the output power is strong, it must be driven by rechargeable
battery or storage battery. Improper voltage and long work will easily
damage the high voltage
module. Be careful when testing and using!
2. Ignite distance keep within 1cm, please.
|