Heavy Duty Engineers Try Set Square Stainless Steel 2” 3" 4" 6" 8" 12" 24" KAF

SAME DAY DISPATCH FOR ORDERS BEFORE 12PM ON WEEKDAYS Slightly expensive then other similarly advertised products as these are Grade A Heavy Duty which means better quality. Engineers Tri Set Square 2″ – 24″ A machinist square or engineer’s square is the metalworkers’ equivalent of a try square. It consists of a steel blade inserted and either pinned into a heavier body at an angle of 90°. there is evidence of pinning at the intersection of the blade and body: the heads of three pins are visible as dark circles. A small notch has been added to the inside corner of the square to prevent small particles from accumulating and affecting the square’s reading. This notch is typical of machinist squares and is occasionally found on carpentry squares as well. 7 different size engineers set squares to choose from ranging from 2” – 24” Product details: Perfect for laying out precise 90 degree angles, checking internal angles, marking stock or using as a guide Precision blades made from high quality stainless steel for maximum strength and durability. Ideal for marking out wooden joints, checking cut stock, or checking the accuracy of your other shop squares. Suitable for a number of uses including carpenters, builders, roofers, remodelling, drawing etc. All surfaces and edges are ground for straightness and parallelism. Hardened and tampered blade Solid construction for accurate results each time Can also be used a ruler if required SPECIFIC DIMENSIONS FOR EACH SET SQUARE 2″ or 50mm overall length 75 x 55mm 3″ or 75mm overall length 100 x 65mm 4″ or 100mm overall length 125 x 80mm 6″ or 150mm overall length 180 x 110mm 8″ or 200mm overall length 230 x 135mm 12″ or 300mm overall length 350 x 185mm 24″ or 600mm overall length 590 x 345mm