Get Your Daily Repairs Done Easily – with Well-Recommended LAUNCH CRP129X Scan Tool

 

✅Free Gift:EL50448 TPMS Reset Relearn Tool Auto Tire Pressure Monitor Sensor For GM Series*1

Diagnose 4 Main Systems to Keep Vehicles Always in Good Condition – Engine, Transmission, ABS, and SRS Systems OBD2 Scanner

 

Diagnose 4 Main Systems to Keep Vehicles Always in Good Condition – Engine, Transmission, ABS, and SRS

LAUNCH scan tool CRP129X supports diagnosing the above 4 major systems of cars by reading DTCs, displaying live data, clearing DTCs, recording diagnostic data, and turning off MILs. A car hobbyist can also make some repair attempts with the help of this LAUNCH diagnostic code reader.

• Engine System: when the engine light turns off, use the scanner CRP129X to give you a detailed understanding of the issue by reading engine parameters or displaying live data such as engine RPM, engine coolant temperature, air intake humidity, airflow, the voltage of the O2 sensor, misfire data, intake manifold pressure, oil pressure, etc. And then clear the code and turn off the light.
• Anti-Lock Braking System (ABS): the scan tool CRP129X will help you to check the ABS, and tell you whether the parameters such as front-wheel speed, rear-wheel speed, lateral acceleration, brake pressure, steering angle sensors, etc. are normal. And then guide you to change damaged parts, and eventually clear the codes, avoiding life-endangering damages.
• Supplemental Restraint System (SRS):the scanner CRP129X will address the SRS-related problems such as seat occupancy sensor, airbags, airbag sensor, etc. And present the health status of the SRS system via live data stream, avoid potential risks and ensure your driving safety.
• Transmission System:with the help of the OBD2 scanning tool CRP129X, you are allowed to read and display the parameters on the transmission system, such as transmission temperature, transmission input speed sensor, gearshift lever position, brake pressure, tachometer drive shaft, etc. And allow you to clear the faulty codes, and keep your vehicles driving smoothly.

Effortlessly Do the Maintenance by Yourself – 5 Built-in Reset Functions, Purchase More from MALL Menu

 

Effortlessly Do the Maintenance by Yourself – 5 Built-in Reset Functions, Purchase More from MALL Menu

Have you ever encountered the below situations?

• The annoying fault light on the dashboard came on and wouldn't go off.
• Spending a long time driving to the repair store to turn off the light.
• Spend a lot to reset replacement parts and turn off the malfunctioning light.
• The OBD2 scanner CRP129X will provide solutions to these issues for it has five commonly-used reset features: Oil Reset, Steering Angle Calibration, EPB reset, TPMS Reset, and Throttle Adaptation.

How would oil reset helps your work?

• If the service lamp is on, you need to reset the driving mileage or driving time so that the service lamp turns off and the system enables the new service cycle.
• After changing engine oil or electric appliances that monitor oil life, you need to reset the service lamp.

How would steering angle calibration help you?

• After replacing the steering angle position sensor, steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recovering the car body, use CRP129X to reset the steering angle.

When would you use the EPB Reset?

• The brake pad and brake pad wear sensor are replaced.
• The brake pad indicator lamp is on.
• The brake pad sensor circuit is short, which is recovered. The servo motor is replaced.

How would TPMS reset help you?

• After the tire pressure MIL turns on and maintenance is performed, the tire pressure resetting function must be performed to reset tire pressure and turn off the tire pressure MIL.

When would you use throttle adaptation?

• The E~CU is replaced and the E~CU does not yet store throttle working features.
• The throttle assembly is replaced or the throttle is cleaned.
• The intake pipe is replaced or removed.

LAUNCH CRP129X OBD2 Scanner 5 Reset Functions + 4 System Diagnostic Scan Tool for DIY Users/Technicians/Car Owners

 

Eliminate Your Concerns About the Scanner Launch CRP129X

Please touch us at any time if you have any other questions or concerns, we will stand by you all the time.

Q: Lack of charger? A: The charger is not included. The obd2 scanner can get power via the DLC of your vehicle and PC. The USB charging cable is in the carrying bag, please double check if you could find it. If this cable is indeed missing, we will provide further after-sales service. Thank you.

Q: Insufficient storage space? A: Please try to clear some cache files and free up some storage space. Here is the path: Settings << Clean up. Or you can try to factory reset the tool. Here is the path: Settings << Recovery. Note: Resetting may cause data loss. Before doing so, please be careful to perform this operation.

Q: The SN Code not registered? A: Please check the time/time zone and network work well. If the issue is still there, please try to factory reset the device. Here is the path: Settings << Recovery.

Q: A specific feature for a model is not supported? A: The official website of Launch provides compatible model searches. However, you are welcome to touch us directly before purchasing, and we will help you confirm the model compatibility promptly, which saves you time and improves the accuracy of the query.

Q: Fail to turn on?

A: In response to this issue, please try the following tips to see if it works.

1. Please try to turn the scanner on after charging for 2-3 hours and check if the indicator light is on;
2. Please try another charging cable available;
3. If it still cannot be turned on, it is recommended that you press and hold the power button of the scan tool for 10-15 seconds to try to turn it on.

Q: Fail to start Auto VIN detection?

A: Please check the following possible reasons

1. Whether the scan tool is properly connected to the vehicle’s DLC.
2. Whether the “Automatic detection on Connect” switch is OFF. If yes, slide it to ON.

For vehicles that do not support Auto VIN: You can manually input the VIN for diagnoses.