If your machine seems like its a bit sluggish well what else can you expect tagged to 250v for 40+ years
High Quality Hydra Capacitors
Low losses non-inductive winding
Self-healing property avoiding short circuits
Small size and limited weight
No leakage risk.
DISCRIPTION
The dielectric is polypropylene film, the electrodes consist of an extremely thin metal coating obtained by vacuum evaporation.
The capacitor has no risk of leakage and the the self-healing property of the film avoids short circuits
The cases are metallic, the covers are in self-extinguishing plastic (class V2 according to UL-94 method).
The capacitor is sealed by an edging of the case on the cover, ensuring air-tight closure.
The use of an-insulating container between the capacitive element and the metal case, combined with the blocking of the capacitive element in resin,
make the capacitor extremely safe both from the electric point of view (earthing insulation) and in terms of resistance to vibrations.
The capacitors are equipped with a protection device against fire danger or lightning danger in compliance with EN 60252-1/A1 Standards
(safety protection class S2) and UL 810 (Fig. 8).
The protection device has been tested according to UL 810 with a fault current ranging from 5A to 10.000A.
Furthermore, the capacitors are certified in accordance with CSA 22.2 N. 790-M1985
VERY LOW ESR.
TECHNICAL CHARACTERISTIC
Capacitance tolerance : ± 5%
Working frequency range : 50 ÷ 60 Hz
IT IS IMPORTANT TO NOTE
If a wrong capacitance value is installed, it will cause an uneven magnetic field around the rotor.
This causes the rotor to hesitate at the uneven spots, resulting in irregular rotation, especially under load.
This hesitation can cause the motor to become noisy,
increase energy consumption, cause performance to drop and the motor to
OVERHEAT.
((((((( WOW AND FLUTTER )))))))