Plug & Play - T12 High-Output Fluorescent Tube Replacement - R17D Base
5 FT T12/HO/RDC waterproof LED directly relamps and
replaces the 70/75 watt 60" fluorescent bulb F60T12/HO without rewiring or
modification. It's a Plug and play product from our "Relamp Series"
when switching to LED lighting. T12/HO bulb works with traditional magnetic
ballasts and modern electronic ballasts for maximum convenience. Also fully
compatible with Instant Start, Programmed Start, Rapid Start ballasts and
legacy pre-heat magnetic ballasts.
Installing the lamp, as easy as changing a bulb:
Turn power OFF before installation
Remove the existing lamp
Install LED T12/HO
Switch on power
General Specifications:
Energy saving of 44% from 70/75 watts to 42 watts with
4620 lumens output
Energy saving of 33% from 70/75 watts to 50 watts with
5500 lumens output
All plastic diffuser for better light distribution, less
spot reflections
O Rings to waterproof rotating caps and sealed diffuser for
indoor and outdoor applications
Heavy duty aluminum heat sink ensures the LED run cooler for
longer
Plastic and aluminum construction ensures less breakage
Long life span of > 50,000+ hours
High lumen output > 110 lumens/watt
Available in 2700, 3000, 4100, 5000, 6000 Kelvin
Uses 42,50 watts = 70/75 watts equivalent
2,3 bulbs per package
Single Sided - 4620 lumens
Dual Sided - 5500 lumens
Nominal length 60-inch T12 (1-1.5inch diameter)
Maximum overall length (M.O.L): Approx. 57.91” (1470 mm) with pins
A.k.a T-12 High output Recessed Double Contact (RDC)
Rotatable R17d end cap that swivels
End cap can be adjusted regardless of socket orientation in
the sign
Special application lamps that are designed for cold weather
Technical description: F60T12/HO, F60"T12/RDC/HO, High output T12 HO
Suitable as Walk-in Cooler, Freezer and Refrigeration equipment lighting
Ideal for vertical or horizontal installation, single-sided or double-sided signs
Perfect for Gas stations, Signage, Billboards, cold weather
Works with electronic and magnetic ballast only!
Ballast operated lamp, not bypass compatible
Additional information:
T12/HO LED lamp requires 4 wires connected. It's not
compatible with 2 wires setup such as Allanson EESB ballasts
Pictures of the gas price sign and company sign are
installed with the relamp 3FT and 6FT Daylight T12/HO waterproof lamp. Pictures
are taken and provided by our customers
Equivalent replacement for:
F60T12/CW/HO
F60T12/D/HO
F60T12/SGN/HO
F60T12/DSGN50/HO
F60T12/WW/HO
Why Plug & Play LED?
Simplicity for installer - The lamp snaps into the existing
fixture without any wiring modifications, installation can be done by virtually
anyone, as long as your existing ballast is compatible.
Safety - Whenever we can shorten the time someone has to
spend dangling from a ladder, things are automatically safer.
No upfront cost - eliminate the need to hire a costly
electrician to do modification.
Energy efficient - output on lamp is significantly improved
with ballast for general consumption and commercial use.
Relamp LED products are designed and developed by New York
LED Luminaries, Inc, Brooklyn, NY.
We accept the following:
PayPal
Mastercard
Visa
American Express
Discover
Has my order been shipped?
You will receive a shipping confirmation email once your order is processed for shipping. There will be a link in the email which you can use to track the shipping status of your order. Due to congestion of USPS network, packages will take a longer processing time, please allow time for USPS page to populate.
How do I cancel my order?
As we process orders automatically, it may not be possible to cancel an order between the times of placing the order and delivery. Please email our sales team for further assistance.
Returns, Replace, Refunds & Cancellations
How can I return my product and request a refund?
We hope you are entirely satisfied with your purchase, but if you are dissatisfied, we will issue a refund within 30 calendar days from the date of delivery of the product. You should email us for steps to take on returns, defective LED or order cancellations etc.
About New York LED Luminaries (NYLL)
NYLL, New York LED Luminaries, is located at 4117 New Utrecht Ave., Brooklyn, New York. Two entrepreneurs worked on LED retrofit kit and have found that the retrofit kit is complicated and time consuming when installed into the current light fixtures with fluorescent lamps. They focused on developing T8 and T12 LED tubes that can directly replace the glass fluorescent lamps without modifications. At the end of 2013, they have developed the first generation LED tubes that work with magnetic and electronic ballasts. Currently, they have further developed the technology of direct replacement for all the linear T8 and T12 fluorescent lamps up to 8 feet. Their design which are also compatible with magnetic and electronic ballasts for G13, FA8 and R17D lamp base/holder.
You can contact NYLL support from 9am-5pm EST, M-F. Please provide us with a brief description of any error observed during installation or product defects you may have received, as well as the order number from the order. We are happy to provide solutions to any relamping questions.
Ordering in Bulk? We can help.
Contact us via email 9am-5pm EST, M-F for more information.