Application:

• Universal.

Specification:

• 100% quality assurance tested, more responsive, less expensive, easier to install.
• Pressure adjustments range from 100-1000+ PSI.
• Provide for a maximum decrease of 60% in line pressure.
• Brings a much better overall braking performance.
• Allow you to fine tune the front to rear braking balance.

Material & Color:

• Material: made of high qualityAluminum.
• Color: as picture.

Package Included:

• 1xBrake Proportioning Valve. (100% Brand New Never Used Or Installed)

Installation Instructions:

• Drain the brake fluid before you do anything else.
• Use the two 0.25" body holes to secure the valve to a mount.
• Connect the "IN" port to the pressure line coming from the master cylinder.
• Connect the line going to the calipers to the "OUT" port.
• Rotating the adjuster knob clockwise until it is all the way in.
• Bleed the brake and check for any leaks at the valve or its fittings.
• Do some test braking to adjust the bias before it works properly.

Cautious:

• Make sure the valve isn't rubbing against any other brake lines or contact with the hood.Brings a much better overall braking performance.

Operation:

• The knob rotated all the way out (counter-clockwise) will provide a maximum pressure reduction of 60%.
• Rotating the know in (clockwise) will incrementally increase line pressure, up to full pressure.

Note:

• Provide Tracking Number With Every Order, Please Buy With Confidence!
• No installation guides are included, we highly recommend to seek professional installation. Any damage during installation will not be refunded.
• Will come with everything you see in the picture. Please allow difference due to manual measurement.
• Please check that the picture matches before purchase. The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.
• For any inquiries or special requests such as larger amount ordering please write to us.