About the trail camera Pre-use instructions: 1. Be sure to switch the camera’s power OFF before inserting /exiting the SD card and loading/unloading the batteries. 2. Formatting the SD card before using it for the first time is recommended. (Put the switch to "AIM " --Press OK key to skip to "FOrn" page and use UP/DOWN to change the “N” after “FOrn_”to “Y”-- Press OK to format the SD card . ) About how to use the trail camera: 1. Install 4pcs AA batteries (NOT INCLUDED). 2. Install SD card (CLASS 6 or higher class Up to 32GB max, NOT INCLUDED). 3. Put the switch to "AIM", then formatting the SD card and setting the trail camera(Time/ Date, Interval Time etc). 4. Put the switch to the “ON” position, The notion indicator LED will blink red for about 10 seconds. Then shut down; it will enter the PIR detection state. the trail camera starts working. Warm tips: SD card and batteries are needed but Not Included in the package. SD card (Class 6 up to 32GB) is recommended. Please format the memory card in the camera before use. Read more Super Night Vision 17 pcs low-glow infrared LEDs brings clear night vision of wildlife without scaring the animals, making it easier to capture amazing moments. Small and Portable Easy to carry, not easy to be found by the target; Dimensions: 10210163 MM, Weight: 171g High Resolution With 12MP photos and 1080P HD videos, this trail camera captures vibrant photos and videos by day and night. Read more Read more Read more