This sale/auction is for a programmed Embedded ( NO PC HOOK-UP required) Standalone Control Board add-on for your Flir/Indigo Photon 160, Photon 320 or Photon 640 (or Tau/Tau2 Limited Zoom) Thermal Imaging Cameras.

This Board works on the Flir Tau / Tau 2 (with limited zoom) or other Flir Thermal Camera with Photon Replicator Board or Wired direct. 
This sale is for the Control Board Only (or with switches) All else shown here is for visual purposes only. 

We have also designed EXTERNAL shutter for the photon series cameras if your shutter is broken.

These are the TIC (thermal imaging cameras) that are in the MSA Evolution 4000, 5000, 5200 and 5200X2 series Firefighting cameras.  The wiring is simple and all units ship with a hookup diagram. Additionally, I can supply with either 10 pin MSA or 30 Pin SAMTEC I/O connector. There's a higher charge for connectors. 

The Flir Camera control GUI is available online, but with our board, No PC required to control the following functions:

Color Palate:
  • WHITEHOT
  • BLACKHOT
  • FUSION
  • RAINBOW
  • GLOBOW
  • IRONBOW1
  • IRONBOW2
  • SEPIA
  • COLOR1
  • COLOUR2
  • ICE AND FIRE
  • RAIN
ROI-Zoom:
  • ZOOM2X
  • REALTIME
  • FREEZEFRAME
Non Uniformity Correction - Manual Shutter
  • FFC/NUC
AGC Modes

  • Histogram
  • Linear
  • Log
  • Once Bright
  • Automatic
The simple board level design has flying leads and you will need to do all soldering/connections to Thermal Camera, Power, Video and pushbuttons. Wired version requires only connections to camera, power and video.

Contact us through eBay for customizations or any questions. THIS controller does not affect the framerate of the Thermal Camera, it will work on all variations, 9Hz, 30 or 60Hz TIC's. Please note: incorrect attachment during hookup can damage this or other devices. We are not there to assure correct wiring.

Please specify if this is for Photon or Tau/Tau2 Thermal Cameras when ordering for proper firmware