GENUINE SPORTING ID PREMIER LEAGUE PRINTING

DIEGO COSTA 19 IN NAVY BLUE

OFFICIAL 2007/08 TO 2016/17 VINYL JUNIOR SIZE BACK NAME & NUMBER

SMALLER SIZE PRINTING TO FIT KIDS SHIRTS AGE APPROX 1/2 TO 11/12 YEARS OLD

PLEASE NOTE THAT THE NAME BLOCK MAY HAVE TO BE CUT IN HALF TO FIT INSIDE THE HARD BACKED ENVELOPE

THESE ITEMS ARE DESIGNED TO BE APPLIED BY A HEAT PRESS AT 145 DEGREES FOR 15 SECONDS ON A FIRM PRESS AND ARE A COLD PEEL WHEN AFFIXED

IF CAREFUL YOU CAN APPLY THEM BY AN IRON BUT THIS IS DONE AT YOUR OWN RISK. SEE INSTRUCTIONS BELOW

HEAT PRESS MACHINE

145 degrees for 15 seconds with firm press, Peel backing when cooled.

IRON ON PRESSING INSTRUCTIONS

1.Place the garment on a FIRM topped ironing board. place the transfers down onto your garment in the order you require so they read correctly when viewing the garment. Only have the back off the shirt on the ironing board, otherwise badges on the front may show through on the back after the heat process. 

2. Carefully place a piece of thin soft white cloth, tissue paper or similar over the transfers ensuring that your transfers do not move whilst ironing.

3.Set the iron to the 145 degrees for your item, and ensure you do not use any steam.

4.Press the iron firmly down onto the covering ensuring you cover all area's

5. Do this for around 15 seconds making sure that each part of the printing gets it's full share of the time needed.

6.Remove the cloth/paper, and leave to cool for 30 seconds.

7. Slowly peel back each plastic covering leaving the transfers in place. If the transfers begin to peel then cover again & re-iron and use more pressure. Do not put iron directly on the finished vinyl print.

However we do recommend a heat press machine as the preferred method of applying printing.

Please note we cannot be held responsible for any damage caused to the garments or printing during the application process when doing it yourself - Please be careful and take your time. 

DO NOT WASH FOR 48 HOURS - DO NOT WASH OVER 30 DEGREES & DO NOT TUMBLE DRY. (as with all transfers hot washing could loosen the adhesive.