Hi, and thank you for looking here.
The availability of the following units is limited so 1st come - first serve. We do have other Daikin systems but slightly different model numbers and prices. Message me if you need anything in particular. We have 3.5Kw unit, 5Kw units and some larger 7 and 10Kw wall mounted systems available.
This Listing is for a 'NEW' Daikin 2.5Kw ( 9000 Btu/hr ) Wall mounted Inverter 'Heat Pump' FTXP25M with a matching outdoor unit RXP25M ( This is a R32 System and new ) , these are ideal for bedrooms, man-cave, garden office, home office, home gym.
They will cool and heat an area of approx 13ft x 15ft all OK ( 4m x 5m )
IT COMES COMPLETE WITH ITS OWN 6M PIPEWORK KIT ( Includes 2 x insulated pipes, flared ends, 4 core cable, some black tape and some cable ties )...so a good system at a good price and ready to install...
The system price direct from Daikin for this equipment is currently over £ 755 plus VAT and Delivery and this will not include pipework kit... A Pipework kit would normally be over £ 110 - 130 ish
( This listing includes VAT @ 20%, so if you are a business this is obviously recovereable )
We also have 3.5Kw systems ( 12000 Btu/hr ) inverter Heat Pumps ( FTXP35M ) and complete with the pipework kit these will be £ 932 ( including VAT ) plus delivery charge. Please message me if you require this system
Brackets can also be supplied for outdoor units @ £ 49.80 per set ( Or rubber feet for floor mounting @ £ 46 per set )
The system will need installing professionally by a F-Gas registered Engineer.
The pipework kit is supplied within the price @ 6m length
We can install this system too but only within 25 Miles of Paddock Wood, Kent.
Installation by us will be at least £ 600 to £900 extra to the cost of the system, depending on the run between indoor and outdoor units
Refrigerant Charge: This system is pre-charged with the factory charge of R32 Refrigerant and will be suitable for a pipework run from 3m to 10m.
For this system the pipework kit is 1/4 and 3/8" Pipework. If you need longer length then contact me.
You are welcome to collect a system from the office ( Below ) and other bits and pieces too......
Power supply: A 16amp to the outdoor unit.
We can supply different length kits or pipework, brackets, cable etc. Rubber feet for outdoor units, condensate pumps etc etc
THIS is not the cheapest of systems BUT it is one of the best on the market and very efficient.
Please
Note: The outdoor Condensing unit/s ( if sold as part of this listing )
may contain Refrigerant Gas ( R410a or R32 ). Subsequently the
installation of this item can only be performed by a qualified F-Gas
engineer. We maintain records of all sales of any of our equipment and
evidence should be provided to us that installation of same is performed
by a suitably qualified Engineer holding current 'F-Gas' certification.
We - as part of 'Chillmech Ltd' hold our own F-Gas Certification which we are happy to provide at any time.
Warranty: 3 years on the system ( subject to having a commissioning report provided once installed and running )
( Parts 3 years ). The warranty will be through us.
Thanks for looking
CoolingSparesUK
Can also deliver to UK via palletways for £ 89.90 ( Mainland Only )
Collection possible but you will obviously need a van
If you have any questions do contact me via ebay.
Kind Regards
Michael
CoolingSparesUK
Paddock Wood ( Chillmech )