Parameter:
Packing List
1. Wireless HDMI Extender Transmitter unit
2. Wireless HDMI Extender Receiver unit
3. Antenna
4. Power adapter (DC 12 V)
5. IR blaster
6. IR receiver
7. User Manual
|
|
|
---|
|
|
|
---|---|---|
1080p Stable Transmission
|
|
One-to-many receiver pairing (less than 4pcs)1.Pair one-on-one 2.Take the paired receiver and receive the receiver to be paired 3.Wait for the red light at the receiving end to turn green 4.The transmitter and receiver turn green at the same time. First press the button on the receiver then press the button on the transmitter, wait 5-10 seconds, the green light on the receiver will flash continuously, indicating successful pairing. |
|
|
|
---|---|---|
HOME Application
|
Meeting Room Application
|
Hall Application
|
Q: Pw(Power LED) off
A: 1. Make sure the power adapter is correctly connected
1. Make sure the power supply would not be interrupted.
Q:Display shows”Searching TX” for long time
1. Make sure all devices are working on supported distance. Draw them closer and try it again.
2. Check if the Transmitter is correctly connected
Q: No video or bad video quality
A: 1. Check if the joints and wires are damaged and make sure they are correctly connected to corresponding interface.
2. Ensure there is video on output devices.
3. Check the receiver is correctly connected to display equipment.
4. Make sure all devices are working on supported distance. Draw them closer and try it again.
Q: IR remote control not working
A: 1.check if the IR blaster and IR receiver is connected correctly. Exchange them and try again.
2.check if the IR blaster and IR receiver are firmly inserted to the right port.