12V Fuel Injector Tester 4 Pluse Modes Fuel Injector Flush Cleaner Adapter Cleaning Tool Kit
Features:
You can use this injector tester to help identify stuck, leaking or burnt-out conditions.
It uses 12V vehicle battery for power.
Large LED display/4 Pulse Modes. Test Lead: 41.5cm / 16.3 inches.
It can work with any fuel pressure tester, easily to clean most car motorcycle fuel injectors.
The engine of the car must be turned off before using this instrument.
Specification
Power Supply: 12V vehicle battery
Operation Environment: 0-40°C,relative humidity < 80%
Storage Environment: -20°C ~50°C, relative humidity<85%
Product Size: 147x82x29mm
Package weight: 200g
Package list:
1 x Fuel Injector Tester
Operation Instructions:
Turn off the vehicle's engine
Connect Black / Red Clip to the Negative / Positive terminal of battery
Connect pulse output terminal to the fuel injector
Press the "MODE SET" key to select the desired pulse mode
Press the "PULSE" key, tester will output pulse to the injector, and then the pulse signal indicator will light as indication
Explanation for 4 modes
Mode 1: the tester outputs 1 pulse, whose pulse width is about 250ms
Mode 2: the tester outputs 50 pulse, every pulse's pulse width is about 7ms
Mode 3: the tester outputs 100 pulse, every pulse's pulse width is about 3.5ms
Mode 4: the tester outputs pulse continuously at the rate of 50 pulses per about 1450ms, every pulse's pulse width is about 7ms