HubZ is a USB v2.0 full speed low power Z-Wave and ZigBee adapter in a USB Stick form factor. When plugged into computer or similar host device, it appears as two (2) serial ports. This device requires an application from a third party to operate. When power is supplied through the USB port, a blue LED on the front will be illuminated. Once the user application is running, the LED may be used to display various types of status information.

Z-WAVE OPERATION

HubZ is an independently controlled Z-Wave static controller that requires an application from a third party to operate. The application will control such functions as Inclusion, Exclusion and Replication.

Inclusion – The process of adding a node into the Z-Wave network

Exclusion – The process of removing a node from the Z-Wave network

Replication – The process of copying network information from one controller to another

This product can be included and operated in any Z-Wave network with other Z-Wave certifi ed devices from other manufacturers. All non-battery operated nodes within the network will act as repeaters, regardless of vendor, to increase

reliability of the network.

ZIGBEE OPERATION

HubZ is effectively a USB to UART bridge connected to a Silicon Labs EM3581

ZigBee module that allows connectivity to a computer’s USB port.

UPGRADE ABILITY

HubZ is designed to support fi rmware upgrades via the USB port.

SPECIFICATIONS

 Operating Temp -32 to 122 F (0 to 50 C)

 Minimum Operating Voltage (USB VBUS supply) 0.4V

 Maximum Operating Voltage (USB VBUS supply) 6V

 Typical current consumption 80 mA

 Dimensions 2.39” x 0.99” x 0.33”

 Z-Wave Developer’s Kit 6.51.06

 Z-Wave Operating Frequency 908.42 MHz / 916 MHz

 ZigBee Developer’s Kit Silicon Labs EmberZNet

 Pro Release 5.4

 ZigBee Operating Frequency: 2.4 GHz