40A Wind Solar Hybrid Controller MPPT LCD Dual USB 12V 24V 36V 48V 60V Battery




 

The BL4600 wind solar hybrid charge controller is the strongest current focus tracking MPPT charging and boosted MPPT charging.

The first group of batteries is to track the current and focus on the highest power point of the MPPT to adjust the internal charging method to maximize the conversion of light energy into electrical energy. The second set of batteries is MPPT charging with low-voltage boost and high-voltage constant voltage tracking. Please recognize the technical characteristics when purchasing, so as to avoid misunderstanding. 



Regarding wind and solar input power, please use the following recommendations strictly:

40A solar controller, the maximum wind input is 200W. The maximum input power of the solar panel is 400W.


PRODUCT FEATURES:

1. Industrial-grade main control chip, 16-level AD sampling accuracy, accurate real-time display of temperature, charging current, and discharging current, and the cumulative power generation is clear at a glance

2. Auto-focus MPPT tracking charging, high charging efficiency, non-stop detection during the charging process two-way focus tracking. Input 15V to 40V boost MPPT for efficient charging.

3. Large-screen LCD display, adjustable charging and discharging parameters UItra-wide charge and discharge can be adjusted. As long as you understand the characteristics of the battery and set its corresponding charging parameters, you can charge any battery. The output power off minute and hour can be adjusted, which is more convenient (the market only has no minute adjustment)

4. Complete 3-stage charge management, effectively protect the battery, and the battery is more durable.This controller is suitable for all kinds of lead-acid batteries (including open, sealed, and colloida. Lithium batteries require user-defined parameters).

5.To charge the 12V/24V/36V/48V/60V battery, the voltage value of the solar panel is 1.5 times the voltage value of the battery to be recharged.

6. Built-in overheating, overcurrent, short circuit, open circuit protection, reverse connection protection, when the fault is eliminated, the controller will automatically recover without damaging the equipment. It is strictly forbidden to short-circuit the boost output power port!

7. Two-way MOS tube anti-backflow circuit, high-power charging mode, ultra-low heat generation.

8. Both charging and discharging are combined with multiple MOS, high-power charging and discharging, and the Phoenix wing aluminum alloy has good heat dissipation performance

9.No battery is needed to supply power to the load, it is a real sunshine application.



SYSTEM CONNECTION:

1. Connect the positive electrode of the battery to the controller as shown in the figure, and the controller will automatically detect the battery voltage.

2. Connect the positive and negative poles of the load to the controller as shown in the figure, and be careful not to reverse them.

3. Connect the solar panel to the controller as shown in the figure.

4. Connect the wind generator to the controller as shown in the figure.

5. Rise Charging function, Or for power output,short circuit is strictly prohibited at any time!

 

1.jpg

2.jpg

3-4.jpg

5-1充电模式.jpg

Charging connection mode:


Wind input 15V-50V, solar panel 18~90V input, charge the battery ①12V, 24V, 36V, 48V, 60V, the output load corresponds to the battery voltage value. Connect the battery first, then the solar panel or wind motor, and finally the load. Connect the battery, first set the voltage value corresponding to the rechargeable battery, set the relevant charging parameters, with memory function.


5-2 双电池充电连接模式.jpg

Dual battery charging connection mode：


Wind input 15V-50V, solar panel 18V input, charge ① battery 12V, ② battery 24V, 36V, 48V, 60V battery; solar panel 36 volt input ① battery 24V ② battery 36V, 48V, 60V battery charge. The output load corresponds to the battery voltage value. Connect the battery first, then the solar panel or wind motor, and finally the load. Connect the battery, first set the corresponding voltage value of the rechargeable battery ①battery, ②battery, set the relevant charging parameters, with memory function.


5-3 升压充电连接方式.jpg


Boost charging connection mode:

 

Wind input 15V-50V, solar panel 18V input, ①not connected to the battery, connected to the negative pole ②Battery 24V, 36V, 48V, 60V battery charging; solar panel 18V--36V input ①not connected to the battery, connected to the negative pole ②Battery 24V ( PV18V), 36V, 48V, 60V (PV36V) battery charging. The output load corresponds to the battery voltage value. Connect the battery first, then the solar panel or wind motor, and finally the load. Connect the battery, first set the voltage value corresponding to the charging ② battery, set the relevant charging parameters, with memory function.


5-4 无电池工作模式.jpg


No battery working mode:


Wind input 15V-50V, solar panel 18V input, ①Do not connect the battery., connect to the negative pole ②Load 24V, 36V, 48V, 60V drive work. The boost output voltage value is consistent with the load voltage value, and the load is finally connected. Connect the wind or hydraulic motor or solar panel with 18 volt solar panel, first set the voltage value corresponding to the load, set the relevant charging parameters, with memory function.

6.jpg7.jpg

Model
TY-WSC-30
TY-WSC-40
TY-WSC-50
TY-WSC-60
TY-WSC-100
Rated Charge Current
30A
40A
50A
60A
100A
Rated Discharge Current
10A
10A
20A
20A
30A
Equalization 12V/24V
B01 Lithium
B02 Gel
B03 Flood
12.2V/24.4V
14.2V/28.4V
14.6V/29.2V
Max Solar Input
18V Solar Panel for 12V battery, 36V solar Panle for 24V <40V
Equalization36V/48V
B01 Lithium
B02 Gel
B03 Flood
37V/49V
42V/56V
44V/58V
Max Solar Input
54V Solar Panel for 36V battery and 72V Solar Panle for 48V <80V

Equalization 60V
B01 Lithium
B02 Gel
B03 Flood
61V
71V
73V
Max Solar Input
60V battery is charged with 90V solar panel, voltage is less than 100V
12V Float
14.2V (defaul, adjustable) 12.0---15.0
12V Discharge Stop
10.7V (defaul, adjustable) 9.0---11.5V
12V Discharge Reconnect
12.5V (defaul, adjustable) 11.0---13.0V
24V Float
28.4V (defaul, adjustable) 24.0---29.0V
24V Discharge Stop
19.0V (defaul, adjustable) 18.0---22.0V
24V Discharge Reconnect
22.0V (defaul, adjustable) 22.0---26.0V
36V Float
42.0V (defaul, adjustable) 36.0---45.0V
36V Discharge Stop
30.0V (defaul, adjustable) 27.0---33.0V
36V Discharge Reconnect
38.0V (defaul, adjustable) 36.0---42.0V
48V Float
56.0V (defaul, adjustable) 48.0---60.0V
48V Discharge Stop
40.0V (defaul, adjustable) 36.0---44.0V
48V Discharge Reconnect
50.0V (defaul, adjustable) 48.0---56.0V
60V Float
71.0V (defaul, adjustable) 60.0---75.0V
60V Discharge Stop
50.0V (defaul, adjustable) 45.0---55.0V
60V Discharge Reconnect
63.0V (defaul, adjustable) 60.0---70.0V
Self-Consume
<10mA
USB Output
5V/2A Max
Operating Temperature
-10-+60℃
Siez/Weight
268*138*66mm/650g








Shipping Policy:


1. Items are usually shipped 1-3 business days after payment has been received.We do not ship on weekends and holidays


2.Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods.


3. Delivery time depends on destination and other factors, it may takes up to 20 days. If you don't receive the item after 30 days, please contact us, we'll investigate and solve the delivery problem.


4.International buyers are responsible for duties and customs fees.We are not responsible for any customs duties or import taxes (if any)


5.Buyer from remote area should pay 35 USD more for the remote delivery service.(Only for Business Express )



Payment Method:


1. Payment methods accepted : Paypal only.


2. All major credit cards are accepted through our secure payment processor PayPal.


3. Payment must be received within 4 business days of auction closing.


4. We only ship to the confirmed address provided by ebay. Before you pay, please make sure your address in ebay matches the address you would like us to ship to.




Returns Policy:


1.One Year Warranty. Buy with confidence!


2. Refund or replacement request is available only requests within a week after parcel received & returning the item as the same condition as received.Please include your eBay ID and brief description of defective problem in your return package.


3. Defective situation must be noticed within 7 days after delivery.


4. Buyer must pay the return postage for any return reason.In return,we will pay the shipping fee for send it back to you.


5.Replacement or refund will be issued after the items are recevied by us in good condition.



Feedback:


1.We maintain all excellence 5 star DSR and strive for 100% customer satisfaction! Feedback is very important to us.  


2.Please do not give us any bad feedback. Or contact us before you open a case. If you can do as we say, we will be very grateful.Please give us the opportunity to resolve any problem.



Duties:

1.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's' customs office to determine what these additional costs will be prior to bidding/buying.


2.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up, do not confuse them for additional shipping charges.


3.Custom holds and delays vary from country to country and are beyond the control of the seller. Please do not hold us responsible for delivery delays caused by customs related issues. Thank You!