Specification: • Model Viking 5001 • Power 5000W RMS • 1 Channel Mono • Power 5000WRMS @ 1Ohm/12.6VDC • Power 6700WRMS @ 1Ohm/14.4VDC • Power 3600WRMS @ 2Ohms/12.6VDC • Power 4300WRMS @ 2Ohms / 14.4VDC • Approximate full power consumption @ 12.6VDC: 400A (music signal) • Operating class D • Active Crossover Linkwitz-Riley Low-Pass variable 30Hz to 8000Hz (12dB/octave) • Frequency Response from 30Hz to 8000Hz • Variable Subsonic Filter from 30Hz to 120Hz • Total Harmonic Distortion (THD) less than 0.3% • Signal to Noise Ratio (S/N) better than 82.4dB • Damping Factor > 100 • Input Sensitivity from 0.2 to 4Vrms • Signal Input Impedance 47kOhms • Signal Input in Differential Mode • Dedicated Control System: Evaluates the working conditions checking for short circuit in the output • Blue LED indicator of Source and amplifiers On/On • Red LED indicator for Distortion at output (Clipping) or short circuit at output • Yellow LED indicator for Out of fuse/Battery voltage below specified. • Approximate Dimensions (LxHxW): 443x64x257mm Attention: In accordance with Federal Law No. 11.291, prolonged exposure to noise greater than 85 dB can damage the hearing system. Package Contents: • 1 Banda Viking 5001 Module Important Instruction Manual : 1 year warranty. |