Complete HHO Hydrogen Kit

Dry Cell with 13 plates in 316L stainless steel

Engines from 600cc to 1400 cm3

Our generators are manufactured in the European Union, in accordance with the technical standards of industrial production of these products.

Technical data

- Generator type: dry cell;

- Generator dimensions: 110x110x110 mm;

- Dishes: 13;

- Voltage: 12V;

- The standard electrical connections of the cell:

+ NNNNN - NNNNN + (N - neutral plate);

- Hydrogen production: 1.0 liters per minute (12A);

- Optimal power supply: 6-8A.

Kit components:

The kit is complete with all the accessories necessary for installation:

- HHO generator - Dry Cell with 13 plates in 316L stainless steel;

- Polypropylene tank (volume of 1.2 liters) with level control strip;

- High pressure hose for HHO gas;

- 30A-12V DC control relay;

- 6 mm section HO7V K electric cables for all electrical connections;

- 30A fuse and fuse holder;

- Nylon safety check valve;

- Insulated terminals and accessories for all electrical connections;

- High pressure hose for HHO gas;

- flexible PVC for the electrolyte;

- Connectors and sockets for connections;

- Electrolyte - potassium hydroxide (KOH);

L

- Extender for the lambda sensor (for electronic injection cars);

- Bubbler;

- Installation manual in Italian (Download Ebook);

Strengths of our products:

Generator Size - The small size of our generators allows for easy installation in all cars. The dry cell can also be installed horizontally or vertically, allowing greater flexibility for installation.

Production of HHO gas - Despite its performance, the size of the cell is relatively small in proportion to the amount of gas produced which guarantees optimal operation over time. The easy reconfiguration of the plates (plus, minus, neutral), by a terminal system, allows a better optimization according to your needs.

INOX Plates - Our platters are made of 316 L stainless steel, laser cut, with a special chemical and physical treatment developed by our team to extend the operating life of the generator. You will not see brown deposits in our dry cells.A certificate from the manufacturer guarantees the quality and durability of the stainless steel you use.

Flanges - The new nylon flanges have been developed uniquely for our generators. Good physical strength and, above all, thermal resistance (melting point 190-350 ° C) makes choosing the best nylon material for these products. Since the generator will be installed in the engine compartment, where temperatures inside in summer can be very high, the thermal resistance of the materials used is very important.

Gaskets and sealing rings - Special elastomers in EPDM rubber (operating temperature limits: from -40 to 200 ° C), with a square section and large contact surface. Optimal pressure distribution across the entire sealing surface.

Summary of the strengths of our products

- High quality construction materials guarantee a long life product;

- Easy reconfiguration of the plate (positive, negative and neutral) from a terminal system, to optimize the performance of your system;

- Absence of brown deposits in the dry cell and of electrolytes in the circuit;

- Stable generator operating temperature without risk of overheating

- Cell insulation to withstand extreme cold in winter conditions, in order to continue to be effective even in the most severe conditions

HHO EFIE Chip 200mhz microprocessor   

More than Fuel Savings

- Eliminates the need for any controller;

- Eeasy to connect - comes with quick conectors;

- No adjustments needed, set automatically;

- No Multi-meter needed - nothing to read or adjust;

- Do not touch or modify any existing sensors;

- To attach to the wiring on the back of the door.

i PWM - Pulse width modulator CC Electronic control 

- check the amperage;

- to the system not to overheat;

- avoid the production of excess HHO.

Technical features:

• Blue color

• Compact dimensions: 90X70X24mm

• Auto Power switch sensor motor ON

• 30A MOSFET TO-220 for PWM control

• PWM Trimmer, from 0% to 100% of HHO cell power on

• PWM dimmer status control LED

• Edge and inside the box the power Adjusts Ampere trimmer

• Mosfet startup delay and slow run up Mosfet.

• External custom black aluminum heatsink: 80X20X15mm

• Internal integrated 30A Fuse ~

• 2-way tape barrier for connecting the water tank sensor.

• 4 30A barrier mode MAX strip: +12 / 24 V and GND Battery input, 12/24 V and GND for HHO cell power supply on

• Compact Size, blue transluvìcent plastic box

• Auto Power switch engine sensor ON

• 30A Mosfet TO-220 for PWM control

• PWM Trimmer, from 0% to 100% HHO CELL Power out

• PWM control dimmer status LED

• Onboard and inside the box the Adjust power Ampere trimmer

• Delay startup Mosfet and slow run up Mosfet.

• External black custom aluminum dissipator: 80X20X15mm

• Internal embedded 30A Fuse

• 2 way barrier strip for the connection of the Water Tank sensor.

• 4 way 30A MAX strip barrier: + 12 / 24V and GND Battery Input, + 12 / 24V and GND HHO CELL power out

• Dimensions: 90X70X24mm

•

• Water sensor

SALE NOT SUBJECT TO VAT PURSUANT TO ARTICLE 1,2,3e5 Presidential Decree 26: 10/1972 N63 AND SUBSEQUENT AMENDMENTS