* For Weller rework station soldering tool, soldering iron tip Tip LTP 1.0mm *Features:
* the whole tip can be welded.
*Applications: Suitable for usual welding, no matter the size of the solder joints
*which is so slim that it can welding flexibly around high components or in a narrow space.
*Suitable for Welle 80W high frequency welle WP80 WSP80 WSP81 WSD81 special
*40000-60000 solder joints super long life environmental protection lead free
MAINTENANCE METHOD
1, try to use low temperature welding high temperature will accelerate the oxidation of molten iron head, reduce the life of the iron head. If the temperature of the iron head is more than 470. c, its oxidation rate is twice that of 380" C.
2, do not put too much pressure on the welding, do not put too much pressure, otherwise the molten iron head will be damaged and deformed. As long as the soldering iron head can fully contact the solder joint, the heat can be transferred, and the choice of the right iron head can also help heat transfer.
3.Always keep tin on the tip of the soldering iron. This can reduce the chance of oxidation of the soldering iron tip and make the soldering iron tip more durable. After use, the soldering iron tip temperature should be slightly lowered before adding new solder, so that the tin-plated layer has a better anti-oxidation effect.
4, keep the flame iron head clean and immediately clean the oxide if there is black oxide on the flame iron head, the iron head may not be on the tin, at this time must be cleaned immediately. When cleaning, first turn the molten iron head temperature to about 250" C, then clean the iron head with a cleaning sponge, and then apply tin, and repeat the action until the oxide is cleaned.
5. The flux with low activity and high activity or strong corrosion will accelerate the corrosion of molten iron head when heated, so the flux with low corrosion should be selected.
*Process control, keep improving, do a good job at one time, zero defects. |
|
