Name | Description |
SKU | MHS3528 |
Screen Size | 3.5inch |
LCD Type | TFT |
Module Interface | SPI (upports up to 125MHz SPI input) |
Resolution | 320*480 (Pixel) |
Touch Screen Controller | XPT2046 |
LCD Driver IC | ILI9486 |
Backlight | LED |
power consumption | 0.16A*5V |
Working temperature(℃) | -20~60 |
Active Area | 48.96x73.44(mm) |
Module PCB Size | 85.42*55.60 (mm) |
Package Size | 136x98x41 (mm) |
Product Weight(Package containing)(g) | 92 (g) |
PIN NO. | SYMBOL | DESCRIPTION |
---|---|---|
1, 17 | 3.3V | Power positive (3.3V power input) |
2, 4 | 5V | Power positive (5V power input) |
3, 5, 7, 8, 10, 12, 13, 15, 16 | NC | NC |
6, 9, 14, 20, 25 | GND | Power ground |
11 | TP_IRQ | The touch panel is interrupted, and it is detected that the touch panel is pressed low |
18 | LCD_RS | Instruction/data register selection, low level is instruction, high level is data |
19 | LCD_SI / TP_SI | LCD display / touch panel SPI data input |
21 | TP_SO | Touch panel SPI data output |
22 | RST | Reset signal, low reset |
23 | LCD_SCK / TP_SCK | LCD display / touch panel SPI clock signal |
24 | LCD_CS | LCD chip select signal, low level enable |
26 | TP_CS | Touch panel chip select signal, low level enable |
There are two ways to use it
The First Method
Directly download the image we created and burn it into the micro SD card and insert it into the RaspberryPi.
Image download see the image download section of the Download Resources
The second method
Step 1, install the latest official image of various systems