MIC5201-5.0BM VENDO LOTTO 280 PEZZI STECCHE 95 (1 STECCA DA 90 PEZZI) PMIC - Regolatori di tensione - Lineari Positivo Fisso 1 Uscita 150mA 8-SOIC NO ROHS NUOVI OBSOLETI
NEW NO ROHS OBSOLETE I SELL A KIT OF 280 PIECES
General
Description
The MIC5201
is an efficient linear voltage regulator with very low dropout voltage
(typically 17 mV at light
loads and
200 mV at 100 mA), and very low ground current (1 mA at 100 mA output),
offering better than
1% initial
accuracy with a logic compatible on-off switching input. Designed especially for hand-held
battery
powered devices, the MIC5201 can be switched by a CMOS enable signal. This enables
control may
be
connected directly to VIN if unneeded. When disabled, power consumption drops
nearly to zero. The
ground
current of the MIC5201 increases only slightly in dropout, further prolonging
battery life. Key
MIC5201
features include current limiting, overtemperature shutdown, and protection
against reversed
battery.
The MIC5201
is available in several fixed voltages and accuracy configurations. It features
the same pinout
as the
LT1121 with better performance.
Product Category: |
LDO Voltage
Regulators |
Mounting Style: |
SMD/SMT |
Package/Case: |
SOIC-8 |
Output Voltage: |
5 V |
Output Current: |
200 mA |
Number of Outputs: |
1 Output |
Polarity: |
Positive |
Input Voltage MAX: |
26 V |
Input Voltage MIN: |
2.5 V |
Output Type: |
Fixed |
Minimum Operating
Temperature: |
- 40 C |
Maximum Operating
Temperature: |
+ 125 C |
Dropout Voltage: |
17 mV |
Series: |
MIC5201 |
Height: |
1.48 mm |
Length: |
4.93 mm |
Width: |
3.94 mm |
Brand: |
Microchip Technology
/ Micrel |
Dropout Voltage -
Max: |
400 mV at 200 mA |
Voltage Regulation
Accuracy: |
1 % |
Line Regulation: |
0.2 % |
Load Regulation: |
0.16 % |
Pd - Power
Dissipation: |
0.625 W |
Product Type: |
LDO Voltage
Regulators |
Subcategory: |
PMIC - Power
Management ICs |
Unit Weight: |
540 mg |