Brake caliper adapter on models Golf MK5, MK6 and MK7  for conversion to 8 piston brake caliper from R8, combined with Audi RS6 brake discs (360x32mm).

The adapters fit the following vehicles with steel steering knuckles:

• Audi A1 S1 quattro 8X1
• Audi A3 8P1
• Audi A3 Sportback 8PA
• Audi TT 8J3
• Seat Altea 5P1
• Seat Leon 5F1
• VW Caddy III MPV 2CB
• VW Caddy III Box 2CA
• VW Golf Plus 521
• VW Golf V1K1
• VW Golf V Variant 1K5
• VW Golf VI 5K1 517
• VW Golf VI Cabriolet 517
• VW Golf VI Variant AJ5
• VW Jetta IV 162
• VW Scirocco 137
• VW Touran 1T3
• VW Touran 5T1

Suitable for all vehicles listed that have a steel knuckle installed (not suitable for vehicles with aluminum knuckles)
It may be that steering angle limiters have to be installed for a complete steering angle, you can find these below in the matching accessories.

Advantages of this brake system:

• high deceleration, also in conjunction with our rear axle braking system
• thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
• directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
• our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling

Required components:

• brake caliper: Audi R8 8 piston, left reference: 8E0615107 ; right reference: 8E0615108
• brake disc: Audi RS4 B5 360x32 mm  reference : 8D0615302B  / or RS4 B7 brake disc 365x34mm reference 8E0615301AB 
• (when the 365x24mm disc is installed, it is necessary to place washers on the brake caliper mount so that the brake disc size is compensated. In this case we recommend our Epytec article with the No. 707-BU

Delivery:

• 2x brake caliper adapters for VW Golf MK5, MK6
• 2x corresponding centric rings
• high-strength mounting screws
• Matching washers for the 365 disc
• material certificate

• Einfache TÜV Eintragung
• Qualität Made in Germany
• Faire Preise ohne Zwischenhandel, du kaufst direkt beim Hersteller und Enwickler des Produktes
• Weltweit Nr 1 in Sachen Tuning Adapter
• 15 Jahre Expertenwissen
• 10 Jahre Garantie

• Can I also use other brake discs as specified in the required components?

• No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: (Link nicht verfügbar)

• Can I also use other brake calipers as specified in the required components?

• No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the (Link nicht verfügbar) :