Press Fit Pins
Pins are intended for press fit or close tolerance removable slide fit applications. Install in a precision bore or a bushing with the center threaded for the Tapered screw. If precise location is not necessary, pin can be used on top of fixture plate. An accessory kit is available to make Installation and Removal (I/R) of the XYZ Pins quick and easy.
Note: If recessing pin into fixture beyond slits be sure to provide clearance for expanding segments.
Mitee-Bite Products releases the new Modular XYZ Xpansion® Pins for Tombstone, Grid Plate and Fixture Plate applications. The unique, patent pending design provides accurate location, repeatability and high holding forces for securing parts on the inside diameter. The XYZ Pin provides “out of the way workholding” and accessibility to all work surfaces with absolutely no external clamping interference. The Threaded Pin is available in standard sizes of 1/2, 5/8, M12 and M16 for tombstones and grid plates. The Press Fit Pins are available in 1/4, 3/8, 1/2, 5/8, M6, M10, M12 and M16 diameters for custom applications. Both styles of the pins are manufactured from “heat treatable” 17-4PH stainless steel. The Press Fit Pins are now also available in 12L14 mild steel. The Pins expand up to 0.030? (0.7mm) and the diameter can be machined for specific applications. The top of the Pins have a slight taper creating maximum line contact in bore and provides clearance during load/unload. Designed for quick set-ups on secondary operations, material coming off prep stations, water-jets or even applications outside of your machining centers!
Description | A | B | C | D | F(+/-) .000/.001" (.000/.025mm) |
G* | Replacement Tapered Screw |
Tapered Screw Thread x Length |
---|---|---|---|---|---|---|---|---|
Press Fit 6mm | 13mm | 7mm | 7.3mm | 5.8mm | 6.00mm | 5.5mm | 38731S | M3-0.5 x 16mm |
Applications
![]() |
![]() |
![]() |