Measurement range: 0 % ... 100 % oxygen (at atmospheric pressure)

Nominal sensor lifetime: ≥ 1 000 000 % volume oxygen hours

Output in ambient air: 13 mV ... 16 mV

Electrical interface: 3 pin (Molex® 22-11-1031)

Accuracy meets: ISO 80601-2-55 requirements

Repeatability: < 1 % volume O2 at constant temperature and pressure

Linearity error: < 3 % relative

Response time: < 12 s to 90 % of final value

Zero offset voltage: < 200 µV in 100 % nitrogen, applied for 5 min

Cross interference meets: ISO 80601-2-55 requirements

Influence of humidity: % rel. per % RH at 25 °C

Pressure range: 0.6 bar ... 2 bar (ppO2 0 ... 1250 mbar O2)

Influence of pressure: proportional to change in oxygen partial pressure

Influence of mechanical shock: < 1 % relative after a fall from 1 m

Operating temperature: 0 °C ... +50 °C

Temperature compensation built-in NTC compensation

Effect of temperature compensation (steady state): between +25 °C and +40 °C: 3 % relative error; between 0 °C and +50 °C: 8 % relative error

Operating humidity: 0 % ... 99 % RH non-condensing

Long term output drift: < 1 % volume oxygen per month

typically: < -15 % relative over lifetime

Storage temperature: -20 °C ... +50 °C

Recommended storage: +5 °C … +15 °C

Recommended load: ≥ 10 kOhms

Warm-up time: < 30 minutes, after replacement of sensor

Weight approximately: 28 grams

Part number: 01-00-0047