Motul 5100 4T 10W-30 4 Stroke Motorcycle Engine Oil - 1 Litre
Technosynthese 4-Stroke lubricant - Ester technology - Meets bike manufacturer specifications, especially HONDA which recommends SAE 10W30 for fuel economy improvement. Smooth shifting. Improved shear resistance. Meets JASO MA2 specifications for optimal wet clutch performance. Suitable for catalytic converters.
Specifications
Performance
Standards - API SM / SL / SJ / SH / SG
Approval - JASO MA2 under N° M033MOT111
Types of use
Street & road bikes, trails, off road bikes, enduro, trial fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines designed to run a low viscosity lubricant, engines meeting Euro 2 or Euro 3 emission regulation, fitted with exhaust gas after treatment systems : catalytic converters, air injection into exhaust pipe...
Recommended for specific HONDA, YAMAHA engines requiring SAE 10W-30 viscosity grade oil.
Other uses: street bikes without catalytic converters, scooters, ATV's, UTV's...
Technosynthese Ester
Technosynthese lubricant reinforced by Ester base stock to warranty anti-wear properties and improve gear protection and life time.
Improved oil film resistance at high temperatures for engine durability.
Optimized Phosphorus and Sulphur content for better operating conditions of catalytic converters.
The innovative anti wear additives package provides excellent gearbox protection. FZG Gear Test results: Pass FLS 14. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates fluid lubricating and wear protection properties at the interface of a loaded set of gears.
Recommendations
Drain interval: according to manufacturers recommendations and tune to your own use.
Can be mixed with synthetic or mineral lubricants.
Properties
Colour Visual Green
Viscosity grade SAE J 300 10W-30
Density at 20℃ (68℉) ASTM D1298 0.871
Viscosity at 40℃ (104℉) ASTM D445 74.6 ㎟/s
Viscosity at 100℃ (212℉) ASTM D445 11.5 ㎟/s
Viscosity Index ASTM D2270 147
Pour point ASTM D97 -36℃ / -32.8℉
Flash point ASTM D92 226℃ / 438℉
TBN ASTM D2896 7.5 mg KOH/g