One (1)

Aftermarket remote keyless entry fob alarm

Transmitter control clicker keyfob controller replacement

FUNCTIONS AT 100% TESTED & GUARANTEED

Marksman / Autopage / Car Pro

 

 FCC ID: H5OT14

(Alternate Spelling: H50T14 H5OTI4)

 Part #: XT-35

3 buttons

 

  

 

Compatible with the following systems:

CPX-2500

CPX-2600

CPX-3500

 CPX-3600

 

Programming Instructions:

NOTE:  This security system will only retain the last 4 remote transmitters programmed.  If the transmitter memory is exceeded, the security system will start deleting transmitters from memory in chronological order.

1.     Disarm the system

2.     Open the door and keep the door open

3.     Turn the ignition key OFF / ON 6 times, keep at ON position at 6th time switching

4.     Within 15 seconds press and hold any button for transmitter code learning, a long chirp confirm transmitter programmed

5.     Apply steps 4 - 5 to program 2nd, 3rd and 4th transmitter

Exit:  Turn the ignition OFF, 3 long chirps confirm exit.

 

Or

In the event, you should need to add or replace a transmitter, it is important that you follow the  instructions below.

Note: Each step must be performed within 10 seconds of the previous

step otherwise the system will exit the programming mode.

1. Enter:

a. Turn the ignition key to the “ON” position

b. Push the valet switch 6 times. There will be 2 long chirp and 1

short chirp

c. You are now ready to program the transmitter(s).

2. Programming the transmitters:

a. Press any button on the first transmitter. There will be 1 short chirp.

b. Within 10 seconds push any button on the second transmitter. There will be

2 short chirps

3. Exit:

a. Turn the ignition key to the “OFF” position, Or

b. Leave for 10 seconds; there will be 3 long chirps to confirm exit.

Note: The system will allow programming of 4 transmitters. If more than 4 transmitters

are programmed, the system will only keep the last 4

 

100% Guarantee Remote Shipping / Return Policy


 

We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.

Please Note: Each remote and circuit board is UV id’d prior to shipment  – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.

 

Does this keyless remote entry come with a battery?  

Yes. It will have a working battery installed.

Battery Condition:

        A. All remotes sold on Keyless4u include working batteries.

        B. Installed batteries are not tested for battery life- they are simply working.

             Some are new and some are used.

 


 

Your vehicle will be installed with one of the following keyless entry systems:  

  a. Standard Keyless Remote Packages: Installed at time of manufacture. 

  b. Optional Keyless Remote Packages: Installed by a dealer. 

  c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. 

  d. No remote keyless entry system at all.

The above information can change which remote you need
for your installed remote keyless system.