Model | D-50F15 | D-50B | ||
CH1 | CH2 | CH1 | CH2 | |
DC Voltage | 15V | -15V | 5V | 24V |
Voltage Tolerance | ±2% | +5%,-8% | ±2% | ±8% |
Rated Current | 1.2A | 1.2A | 6A | 1A |
Current Range | 0-1.2A | 0-1.2A | 1-6A | 0.2-1A |
Rated Power | 54W | 54W | 54W | 54W |
Ripple & Noise | 50 mVp-p | 100 mVp-p | 50mVp-p | 100mVp-p |
DC Adjustment Range | CH1: -5%,+10% | |||
Setup,Rise,Hold Time | 200ms,50ms,20ms at full load |
INPUT
Voltage Range 85~132 VAC/170~264VAC47~63 Hz,selected by switch 240~370VDC
AC Current 1.3A/115VAC0.65A/230VAC
Efficiency 73%(SKD-30A); 73%(SKD-30B)
Inrush Current Cold start 18A/115V36A/230V
Leakage Current <0.5mA/240VAC
PROTECTION
105%~150%
Protection type: Shut down o/p voltage, recovers automatically after fault condition is removed
ENVIRONMENT
Working Temp., Humidity -10°C~+60°C;20%~90 %RH
Storage Temp., Humidity -20°C~+85°C,10%~95 %RH
Vibration 10~500Hz,2G 10min./1cycle,period for 60min, each along X, Y, Z axes
SAFETY
Withstand Voltage I/P-O/P: 1.5KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC
STANDARD
Safety Standard Design refer to UL1012
EMC Standard Design refer to FCC Part15 J Conduction
OTHERS
Weight 0.53Kg
Packing 24pcs/13.6Kg/0.75CUFT
NOTE:
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ &47μ
parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation