12M Car SOUND DEADENER High quality butyl rubber 30% THICKER Proofing dampening
 
 
 DESCRIPTION 
  • VIP:Dear buyer. After you placed any order in our store,you have been the VIP of our store. In the next year, any order in our store can be discounted 8%.
  • We provide Lifetime Warranty.
  • Compared with Butyl Rubber materials on the market,we promise:The Butyl Rubber material we use is almost the highest purity,it doesn't give off any Formaldehyde、Acetaldehyde、Bitumen. About the Butyl Rubber, safety is the thing you should be most concerned about,of course, we specially took a long time and did SGS test , to make sure all buyers ( Suitable for pregnant women and babies ) can buy with confidence.
  • The vibration damping products controls vibration and sound as well as heat via the combination of a butyl based noise absorption layer and an aluminum foil top layer. Use this to reduce panel vibration which will reduce road noise, improve sound quality from your audio system, and also keep the car cooler in summer and warmer in winter.
  • It with the top-grade softness and is suitable for almost any solid surface. Not only is it easy to use and install, but it's an excellent solution for controlling noise and heat will do so for a great many years. This product can be used on every panel in your car to create the perfect quiet driving experience.
 
 
 FEATURES 
  • Environmental materials butyl rubber
  • Embossed pattern reduces creasing & works as a guide when cutting.
  • True aluminium face
  • With excellent vibration and noise reduction, sound damping 2.8mm thick
  • Shock Absorption, vibration resistance, release the structure transmission attenuation vibration energy
  • Waterproof, Fire-proof, Cold resistance, anti-aging and strong adhesion
  • High temperature resistance
  • Keep your drive comfortable and cool in summer, and warm in winter
  • Seriously sticky stuff + Super easy to install Can be easily molded to the shape of car floor pans, inner doors and parcel shelves
 
 
 SPECIFICATION 
 
Material: Aluminum Foil + Butyl Rubber + Wax Paper
Color: silver/black
Recommended Install Temperature: -10°C ~ +60°C
Resistance Temperature Range: -40°C ~ +149°C
Waterproof & Fire Resistant: Yes
Sheet Thickness Approx.: 2.8mm-3mm
 
 
 APPLICATION 
 
-Rear decks
-Doors
-Floors
-Any part of the trunk
-Trunk
-Roof
-Quarter panels
-Hoods
 
 
 
 PACKAGE INCLUDED 
 
8M Roll of Sound deadener + 1x Installation kit(free gift)
         Or 
10M Roll of Sound deadener + 1x Installation kit(free gift)
 
 
 
 
 
 WARRANTY 
  • LIFETIME WARRANTY
 
 
 INSTALLATION 
 
 
1.Decide what part of the car you want to insulate first:roof,floor,doors or a hood.
2.Remove the remains of the factory insulation once you have dismantled the interior.Properly clean and degrease the surface prior to installation of deadener.
3.Measure the pre-cleaned surface of the prospective spot that you are going to treat.
4.Try to locate the piece of material onto the prospective surface of a car without removing an adhesive paper.When your sheet is ready to used,lay that down to the surface and let is glue.Flatten the sheet with hands to avoid air bubbles between the metal and insulation material.Use a roller for rolling down the foil as a neat step.
 
 
 
Installation Notices:
Please clean the surface you want to paste.
Make insulation materials and sheet metal firm fit,and play best adhesive,damping performance.
Paste soundproof or damping plate,you could heat with a hair dryer to make it soft,then compacted by hand.If the room temperature is below 5 degrees Celsius first with sun lamp heating it until soft.Then remove the wax paper and paste.
It would be best to wear the gloves when working.
PushAuction