Mamba Fiber integrates Dual Single Mode (SM) fiber with ST connectors as a single product. SM fiber can extend Mamba snake to distance of up to 20 Km. The advantage of Mamba Fiber system is that it uses WDM technology over SM Fiber thus only one strand of SM fiber is needed for TX and RX. That is half saving on Fiber cable of distance up to 20 km. Mamba Fiber has also built in dual Fiber redundancy thus providing complete auto fail over support. The Mamba Fiber comes in 16x16 or 32x32 analog line level I/O in 1RU. All analog I/O are available on back of the Mamba on DB25 (standard Tascam analog pin out). The Mamba Fiber also provides 8in/8out XLRs on front for easy and quick patching. If you want to use mic inputs, you can use any external micpre with Mamba fiber or we can supply Mamba fiber with micpre package too. Mamba fiber systems are widely used in live broadcast by major TV networks, PGA tour golf, EU soccer, worship, world series, Sochi winter Olympics and many more.   We also have 32 ch x 32 ch Mamba Fiber on 1RU. 


****** Price is for 2 units or both ends  *******

Mamba Fiber Digital Snake System Key Features

 

  • 16x16 or 32x32 channels of line level Analog in and out
  • 8x8 XLR on front for quick and easy patch
  • Use external micpre for mic inputs
  • Max analog input level is +18 dBu, SNR=105 dB, THD+N (1kHz @ -1dBFS) = 0.005% (@48K)
  • Maximum output level = +18 dBu, SNR = 114.6 dB, THD+N (1kHz @ -1dBFS) =0.0029% (@96K)
  • Input impedance = 4.53 Kohm
  • Output impedance = 100 ohm
  • Analog end to end latency ~ 600 microsec
  • Digital end to end snake latency ~200 usec
  • 96K sample frequency / 24 bits per sample
  • Use of external micpre for any mic inputs at stage
  • Analog in and out via DB25 (Tascam/Digi Analog standard pin out)
  • Use DB25 to XLR breakout cables to connect to XLRs
  • Use DB25 to DB25 cable to connect to Tascam DB25
  • WDM Fiber Media converters
  • Uses single fiber for TX and RX
  • Different wavelength for TX and RX
  • Fiber is single mode 100BASE-FX
  • Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards
  • ST-Type connector (for SC or LC - pls use a ST to xxx coupler or patch cable)
  • 1550nm on transferring data
  • 1310nm on receiving data
  • Link Fault Pass through and Far End Fault minimize the loss caused by link failure timely
  • Fiber redundancy - one fiber is out other fiber is automatic
  • Fiber connector via ST
  • 2 year Limited warranty
  • 1U rack mount box (19"X14"X1.75") @ 12-14 pounds
  • Solid steel and sleek finish

Analog Input:
Maximum input level = +18 dBu
SNR=105 dB
THD+N (1kHz @ -1dBFS) = 0.005% (@48K)
Noise floor = - 87 dBu
Input impedance = 4.53 Kohm

Analog output:
Maximum output level = +18 dBu
SNR = 114.6 dB
THD+N (1kHz @ -1dBFS) =0.0048% (@48K)
Noise floor = - 96 dBu
Output impedance = 100 ohm


Fiber MCs
IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Adopts WDM technology
Extends fiber distance up to 20km
Single-mod Fiber
TX 1550nm
RX  1310nm

XLR Analog I/O on front
- standard XLR male for output and
- XLR female for input
- you can have all 16 input or all 16 output or 8 in x8 out
- Same analog is on DB25 back side
- use only one to avoid overload


DB25 Analog I/O
Tascam analog pin out standard
8 ch per Db25 (in or out)

Fiber connector:
ST type for single mode fiber termination

Warranty:
Two year Limited warranty

Power Supply:
Universal power supply AC 90-240V.
Max power consumption: 16 W
ON/OFF switch on back

Rack mountable Chassis:
1U  (19" [L] X 14" [D] X 1.75" [H])
Solid steel and professional shiny blue finish
Weight: 12 pounds (16x16) per Box - Total 24 pounds