Medical Elastic memory Thermoplastic External Nasal Splints

Ideally suited for treatments of Rhinoplasty

Ø 100% Elastic Memory

After reheating the shape and size back to original mould it can back to original

Ø Easily moldable

Activated to become very soft and stretchable in temperature 60 - 70ºC (140 - 158ºF)

Ø Excellent Ductibility

Sizes not shrink after molding

Ø Good Comfort

Good breathability with perforation

Ø Excellent Transparency

Turns transparent when reaching activation temperature which allows for precise positioning of the material on the area to be covered and prevents accidental self bonding after heating

Ø Eco- friendly

Can be self-degrade in the nature environment in a year

Ø Heating time 1 - 2 minutes at a temperature of 60 - 70ºC/140 - 158ºF

Ø Working time 3 - 4 minutes

1. Adjust the water bath to 75℃, put the sheet into hot water for 2-3 minutes.

2. After the sheet turns to soft and pliable, put it on a soft cloth and dry it on.

3. Mould it according to the body part, hoop and loop straps be hold the splint in place, padding/liner materials increase patient comfort.

4. Keep the sheet for 10 minutes, it can be plastic well.

5. With a perfect memory, it can be remoulded more than 8 times.

1. Adjust the water temperature to 65℃-75 ℃ , don’t more than 80 ℃.

2. Be sure not to place the sheet in hot water for too long time. In general, 2-3 minutes should be enough to make it soften and activation.

3. Working surrounding. When the operation room temperature is more than 20℃, it can be plastic within 1.5-3 minutes; When the room temperature drop to 10℃, the plastic time is about 30-50 minutes.

4. For orthopedic splints, after activation, it can be stretched to 1.5 times as its original size. Excessive pulling could affect its reshaped resilience and damage its memory function.

5. How to restore a molding splint back to its factory settings? Just put it into the hot water with 65℃-75 ℃, and then it will rebound automatically after 5 minutes.

6. Due to the characteristics of the material itself, in the activation process, it will occasionally occur small area of sticky. Please be sure not to pull randomly. When it leaves the water to solidify, it will automatically relieves adhesion.

7. Storage in room temperature is enough.

8. The products is Eco-friendly, put it outside in the yard with natural climate about 12 month, it will be degraded by itself .