Why purchase a recycled keyless entry remote transmitter?
The vehicle keyless remote key fob you are going to purchase from us is pre-owned; aka: used, previously loved ;). We recycle OEM and aftermarket keyfobs and put them through a concise refurbishing process so we can guarantee our products are delivered to you in a ready-to-program state. We offer these car clickers at a significant cost savings to stealerships so you can keep your hard earned cash for something more fun while lightening your ecological footprint J. We call that a win-win! Why wait? Add some convenience to your daily routine and help save the environment, order your recycled car remote control today!
Installed RKE System Type: Please be sure you have an AFTERMARKET (RKE) remote keyless entry system. If your current remote looks the same then this will work. Other options include: Dealer Installed or Factory. The system installed in your vehicle will CHANGE the required remote. If you are unsure send us a message with your current remotes FCC ID and Part # and LED Light color. If you no longer have your remote then send us a message with your system brand, and system id #.
What are you purchasing ? This is ONE (1) replacement keyless entry remote control that will work with your AFTERMARKET installed RKE system.
Compatibility: Works with vehicles that use a compatible aftermarket RKE (remote keyless entry) system installed. See our compatible system list below or match your current remote FCC ID and / or part # or circuit board # and LED Light color (if applicable)to the numbers listed below.
|
Compatible FCC ID#(s): |
EZSDEI7146 |
|
Alternate Spellings |
EZSDEI7146 This is the Viper 7146V 1-Way, 4-Button LED Replacement Remote Control. FCC ID EZSDEI7146 External-Photos, EZS DEI7146, EZSDEI7146, EZSDEI7I46, EZSDE17146, EZ5DEI7146 DEI Headquarters, Inc. Remote Control DEI7146 |
|
Part #(s) |
7146V IC ID#: 1513A-7146 7146VModern Viper 7146V 4-Button Remote Control Transmitters 434MHZ 2/66 CODE For The Viper 5305V EZSDEI7146 EZSDE17146
introduced in 2019 and replace many of the older legacy Viper, Avital, Python, Clifford and Automate remote controls.
1 way 1way one oneway 7146V 7146 V 1513A-7146
IC ID#: 1513A-7146 |
|
Dealer #(s) |
|
|
Button Count: |
3 Buttons; Lock, Unlock, Remote Start |
|
Battery (installed): |
2; CR2016 |
|
Frequency: |
907-923 MHz |
|
LED Light Color: |
Blue |
|
Circuit board #s: |
|
|
#s on Chip on board: |
|
|
Condition Notes: |
Pre-Owned ready to program to your compatible vehicle RKE system. |
|
Compatible Aftermarket Installed Systems: |
4105V 3102V 3105V 3305V 4105V 4115V 5105V 5305V 100 HF / 410V / 8G - up 150 ESP / 552V / 9C - 0H and 0I - up 160 XV / 562V / All dates 210 HV / 416V / All dates 211 HV / 412V / All dates 300 HF / 430V / 8B - 9A PC 300 HF / 429V / All dates 300+ HF / 432V / 8B - 9B 330V / 427V / All dates 350 HV / 426V / All dates 500 HF / 438V / 8B - up PC 500 HF / 439V / 7J - up 550 HF / 553V / 8D - 9A and 9B - up 560 XV / 563V / All dates 571 XV / 572V / 4G - 5G and 6K - up 600 HF / 448V / 8B - 8L PC 600 HF / 449V / 9A - up 650 XV / 436V / All dates 671 XV / 437V / All dates 700 ESP / 379V / All dates 771 XV / 567V / 4E - 4L and 5A - 7J PC 800 SHF / 381V / 8B - 8F and 8G - up 850 XV / 446V / All dates 1000 / 3101V / All dates 3000 / 3201V / All dates 3002 / 3202V / All dates 4103 XV / 4103V / All dates 5000 / 3301V / All dates 5002 / 3302V / All dates 7900 / 5501V / All dates VSS5000 / VSS5000 / All dates
*date codes can be found on the main control unit which is usually located under your dash on a small circular sticker that has "OK" on it |
|
Programming: Please note not all customers will be able to complete the programming on their own so if you are having trouble or unsure diagnostic programming is available at your local qualified automotive locksmith or car/audio shop. |
1a. With UNLOCK ALL option:
Press and release, then press and hold the Programming button
of the XL202 module. The LED flashes slowly.
1b. With DRIVER DOOR PRIORITY UNLOCK option:
Press and hold the Programming button of the XL202 module.
The LED flashes slowly.
2. Hold the Function button on the remote until it emits a long beep
and its LED turns ON solid (approximately 12 seconds).
3. Press and hold the Start button until the remote beeps 3 times and
its LED turns ON solid.
4. Press the Lock button on the remote. Confirmation tones are heard
upon successful programming, and the XL202 LED turns ON
solid for one second, then turns OFF to indicate the pairing was
completed successfully.
5. When programming is finished, release the Programming button
on the XL202.
6. Wait 30 seconds for remote to exit programming. All remote
lights will be off when the programming mode has been exited |
Why does your vehicles installed RKE / Security system determine which remote control your can purchase?
The remotes job is to pair with your vehicles installed RKE system. It will only sync to a matching system; therefore, you cannot purchase a different type of remote than the remote manufactured with the system. It will not pair with a foreign system.
Programming:
We will send you information on how to locate programming requirement/instructions for your make, model, and year vehicle. Some vehicles have DIY (do-it-yourself) programming instructions available. While other vehicles require diagnostic programming which is available at your local qualified automotive locksmith or dealer.
Programming Requirement Information NOTE:
The vehicle manufacturers determine the programming requirements at the time of manufacture. We pass the programming requirements / instructions on to you as a courtesy. We do not write the programming nor do we determine which vehicles require diagnostic programming and which vehicles can be programmed by the you (DIY). We are not locksmiths nor mechanics nor are we familiar with EVERY vehicles program sequence. If you have questions:
1. Check your Vehicle Owners Manual for OEM Factory remotes or The User Manual for Dealer Installed or Aftermarket RKE systems.
2. YouTube has many video postings from do-it-yourselfers to assist with all kinds of questions & most customers find if very helpful to WATCH the programming being done which can eliminate mistakes in the sequence.
To locate the programming for your vehicle via this method go to YouTube and once there in the search bar type in the following:
i. If you have a factory RKE system: your make model year + the words program remote (i.e.: 2005 Ford Mustang program remote)
ii. If you have a dealer installed or aftermarket RKE system: the FCC ID or system type + the words program remote (i.e.: ELVAT5C program remote or AS200 program transmitter?)
3. For OEM FACTORY installed systems: send us an eBay message with your vehicles make, model & year = we can pass on to you any programming information requirements we have on hand.
4. For DEALER INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# and the vehicles make, model, & year = we can pass on to you any programming information requirements we have on hand (the programming for dealer installed RKE systems will be different than Factory or Aftermarket installed RKE systems).
5. For AFTERMARKET INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# = we can pass on to you any programming information requirements we have on hand (the programming for aftermarket installed RKE systems will be different than Factory or Dealer installed RKE systems).
6. There are also many auto forums that you can go onto by just conducting a google search with your questions.
7. or a local automotive locksmith or your local parts/car/audio store will typically be able to assist you if you are trying to avoid the dealer.