Netvox's wireless CO2, temperature and humidity sensor collects and transmits the CO2 concentration in the air along with accurate messages reporting temperature and humidity. The alert messages are sent to a centralised monitoring system via the LoRaWAN® protocol at pre-programmed intervals.
We can supply third-party online wireless sensor monitoring and notification system to view data and set alerts via SMS text and email.
Ask us about our zero-touch provisioning service, this sensor can be supplied pre-configured and ready to go.
Electric:
Power Supply | Requires DC power supply, available to purchase separately |
Battery Life Time | Battery back up support for an average of 8 weeks |
Working Voltage Range | 6.4VDC~7.2VDC |
Sleeping Current | 300uA |
Working Current | 65mA (When the sensor is working). |
Module Wake Up Current | 6.3mA@3.3V |
RF Receiving Current (RX) | 11mA @3.3V |
RF Emmission Current (TX) | 120mA @3.3V |
Battery Measurement Accuracy | ±0.1V |
Frequency:
TX Power | 19dBm±1dBm |
Rx Sensitivity | -136dBm (LoRa, Spreading Factor=12, Bit Rate=293bps) -121dBm (FSK, Frequency deviation=5kHz, Bit Rate=1.2kbps) |
Antenna Type | Built-in Antenna |
Communication Range | 10 km (line-of-sight, actual transmission distance depends on the environment) |
Data Transfer Rate | 0.3kbps~50kbps |
Spread Technique | LoRa/FSK |
Available Frequency | EU868 (others are available on request) |
Physical:
Dimensions | 117mm x 89.05mm x 82mm |
Working Temperature | -20°C ~ +55°C |
Storage Temperature | -40°C ~ +85°C |
Humidity Detecting Range | <90%RH |