eBay

For How To videos on this pump repair go to YouTube and look for these titles: "LX Series Guangdong Pump WUA 200 300 400 How To Repair The Spa Guy" or "How To Determine whether you have an Aqua Flo, CMP or Guangdong Wet End The Spa Guy"

NOTE: This Part will not Fit Sundance® or Jacuzzi® Tubs with an Intertek LX Wet End..

This 3 Horse Power Impeller, Seal & Bearing Kit fits 56 Frame Pump Wet Ends manufactured by Intertek LX Brand only. This Kit Includes the Impeller, Seal, Bearing, Silicon and a Seal Installation tool.. The pumps this impeller fits usually have the part number WUA-300, WP-300 or LP-300 on the label. Watch the video for instruction on how to install this part and also how to determine if this is the correct part. It is about 4 13/64" across the face edge to edge, it measures about 3" from the tip of the front to the tip of the sleeve in the back, it also measures 7/16" from the inside of the vane edge to edge. Some of these impellers have a number on them B351-21 if yours does you must measure the overall width of the impeller to get the correct one. They cast one implore with that number on it and they trim the impeller down to the different horse powers so be sure you do measure edge to edge..This Bearing Does fit This Motor... NOTE: This Wet End looks a lot like an Aqua-Flo and a CMP Wet End but they do not interchange see the video for how to tell the difference!

Note: This Impeller Fits Intertek Chinese LX and LP series Pumps only Some Pump Part numbers are as follows: (WUA300-II, WUA300-I) (LP300) (WP300-II/,300-I)

To Install this Impeller you will have to remove the face plate and unscrew the impeller. There are time where you will have to disassemble the motor in order to loosen the impeller because they get stuck when they leak.

Note: We offer parts & kits for this wet end and complete pumps in our store.

I do offer FREE SHIPPING within the United States, and will Ship WORLDWIDE through the Global Shipping Program.

Visit our Store as we also offer these and other associated products and accessories for your Spa.

Please note: When you have a seal leaking in most cases you will need an impellor because the leak caused water to get into the metal shaft area that the impeller is screwed onto and expands and damages the impellor. We offer the impellers along with the seal in a kit in our store. Watch the video above for how to install the seal and other repairs for this pump as well.

WUA200-II,WUA300-II,WUA400-II,WUA200-I,WUA300-I,WUA400-I,LP200,LP250,LP300,LP150,WP200-II,WP250-II,WP300-II,WP200-I,wp250-I,wp300-I,wp400-I

WUA200,WUA300,WUA400,WUA200,WUA300,WUA400,LP200,LP250,LP300,LP150,WP200,WP250,WP300,WP200,wp250,wp300,wp400,chinese,lx,guangdong,energy saver spa equipment,b351-21,inertia,intertek