Line Finder Wire Tracker POE Switch Network Cable Tester auto power-off
Digital signal line finder
5 modes are supported:
1. Hunting test: digital signal hunting, supports two modes: standard hunting (suitable for common places hunting); anti-interference hunting (suitable for switches and long-distance hunting)
2. Alignment test: fast and accurate alignment, support on-off detection, clear network cable short-circuit, open-circuit, crossover and other conditions, which is convenient for cable detection, troubleshooting, and intuitive display on the LCD display
3. Single-ended test: Insert the network cable into the network cable port on the front left, and the test result will be displayed. If there is any defect in 1-8 network cables, it will display "0"
4. Length test: plug in to test the length of the network cable, support the cable length test within the range of 1m-250m, and detect the cable length with one button, which is fast and convenient
5: POE identification: Use the network cable to connect the POE device to the host, you can expressly identify whether the device is a standard POE device, and display parameters such as the number of power supply cores, voltage, and equipment standards.
With automatic shutdown function, the default time is 10 minutes, it can also be changed to 10/20/30/40/50/60 minutes, a total of 6 gears
Specification
Support cable type | 4P/8P network cable,BNC cable,single-wire |
Max test distance | >200m |
Max scan distance | >300m |
Support max voltage | 48V(only ejector) |
Signal frequency | 455Khz |
Battery type | 5 * AAA battery |
Ejector power consumption | Max:0.15W |
Receiver power consumption | Max:0.2W |
Max cable length can be measured | 250m |
Environment | Operating Temperature: -10 ℃-60 ℃ Relative Humidity: 10%-90%(non-condensing) Storage Temperature: -20℃-70℃ Relative Humidity: 5%-90%(non-condensing) |