EU PLUG! 220-240v

 

Chlorine generator (sea water system) Intex Krystal Clear, with timer (26664).

 

Chlorine generator Intex 26664 is designed for water purification in small frame and inflatable pools.

 

Fights the formation of mucus, moss on the walls and bottom of the pool, and also helps to protect the water from the growth of microbes and green ooze.

 

The Krystal Clear Seawater System combines a unique two-step pool sanitization technology. By using common table salt, the Krystal Clear Chlorinator simplifies pool maintenance and eliminates the need for pool chemicals, and provides clean, clear water that is non-irritating to skin and eyes.

 

Has a touch control panel with the ability to lock, allows you to set the operating modes:

- timer for automatic operation (6/10/14 hour cycles),

- pressure and water flow sensor,

- self-diagnostics and auto-shutdown system

- 24 hour automatic cycle.

 

Designed for use with a filter pump with a capacity of 1136 to 3785 l / h (purchased separately).

 

Recommended for Intex pools up to 17413 liters.

 

Characteristics:

Voltage: 220-240V

Cycle Off Timer

Filter pump required with flow rate: 1136 to 3785 l / h

Chlorine production: 4 g / h

 

PRINCIPLE OF WORK. CHLORINE GENERATOR

Chlorine generator is an installation with a unique two-stage method of disinfection of water in the pool. The necessary component of water for its work is salt - NaCl, and also the chlorine generator works only in pair with the filter pump.

 

STAGE №1:

PRIMARY ELECTROLYTIC CELL Salt (NaCl) falling on the titanium plate, is subjected to the process of elec

 

STEP №2:

SECONDARY ELECTROLYTIC CELL Electrocatalytic Oxidation (ECO) is a unique invention of Intex. This process breaks down water molecules into oxidants that kill algae and bacteria, reducing chlorine in the water by up to 60%.

 

ELECTRONIC CONTROL PANEL

Intuitive interface equipped with the most necessary information. Allows you to monitor all the necessary indicators and easily control the operating modes of the device. All you need to do is program and monitor the indicators. Also a nice bonus is the built-in internal notification system, which will immediately notify you of any deviations.

 

VIEWING SETTINGS

You can use the LOCK / UNLOCK button during operation. In 10 seconds the system will display information about the set time.

 

IMPACT CHLORINATION BOOST

Boost mode, injection cycle, increases the operating hours of the device by 8 times. When finished, the system will automatically switch to normal mode.

 

24-HOUR TIMER

With the clock you can set the time of daily water filtration, it is also possible to control the pump manually. Automatic on and off

 

SELF-CLEAN SELF-CLEANING SELF-CLEAN

electrode self-cleaning mode is a built-in function of automatic cleaning of the electrode from calcium and other substances. With a large accumulation of sludge, it is recommended to clean manually.

 

CHLORINERATOR SALT

Which is better to use? The best choice is rock (food) salt. For example, table salt is a protection against hard water, but the cost is unjustified; the use of iodized salt is also not recommended, as it gives a deep yellow color of water when in contact. Salt is added once (before changing the water), calculation: 3 kg of salt per 1000 liters of water.



 

 

 

 

 

 

 

 

 

 

Intex Chlorine generator 26664 (sea water system) Krystal Clear 220V EU Plug

EU PLUG! 220-240v

 

Chlorine generator (sea water system) Intex Krystal Clear, with timer (26664).

 

Chlorine generator Intex 26664 is designed for water purification in small frame and inflatable pools.

 

Fights the formation of mucus, moss on the walls and bottom of the pool, and also helps to protect the water from the growth of microbes and green ooze.

 

The Krystal Clear Seawater System combines a unique two-step pool sanitization technology. By using common table salt, the Krystal Clear Chlorinator simplifies pool maintenance and eliminates the need for pool chemicals, and provides clean, clear water that is non-irritating to skin and eyes.

 

Has a touch control panel with the ability to lock, allows you to set the operating modes:

- timer for automatic operation (6/10/14 hour cycles),

- pressure and water flow sensor,

- self-diagnostics and auto-shutdown system

- 24 hour automatic cycle.

 

Designed for use with a filter pump with a capacity of 1136 to 3785 l / h (purchased separately).

 

Recommended for Intex pools up to 17413 liters.

 

Characteristics:

Voltage: 220-240V

Cycle Off Timer

Filter pump required with flow rate: 1136 to 3785 l / h

Chlorine production: 4 g / h

 

PRINCIPLE OF WORK. CHLORINE GENERATOR

Chlorine generator is an installation with a unique two-stage method of disinfection of water in the pool. The necessary component of water for its work is salt - NaCl, and also the chlorine generator works only in pair with the filter pump.

 

STAGE №1:

PRIMARY ELECTROLYTIC CELL Salt (NaCl) falling on the titanium plate, is subjected to the process of elec

 

STEP №2:

SECONDARY ELECTROLYTIC CELL Electrocatalytic Oxidation (ECO) is a unique invention of Intex. This process breaks down water molecules into oxidants that kill algae and bacteria, reducing chlorine in the water by up to 60%.

 

ELECTRONIC CONTROL PANEL

Intuitive interface equipped with the most necessary information. Allows you to monitor all the necessary indicators and easily control the operating modes of the device. All you need to do is program and monitor the indicators. Also a nice bonus is the built-in internal notification system, which will immediately notify you of any deviations.

 

VIEWING SETTINGS

You can use the LOCK / UNLOCK button during operation. In 10 seconds the system will display information about the set time.

 

IMPACT CHLORINATION BOOST

Boost mode, injection cycle, increases the operating hours of the device by 8 times. When finished, the system will automatically switch to normal mode.

 

24-HOUR TIMER

With the clock you can set the time of daily water filtration, it is also possible to control the pump manually. Automatic on and off

 

SELF-CLEAN SELF-CLEANING SELF-CLEAN

electrode self-cleaning mode is a built-in function of automatic cleaning of the electrode from calcium and other substances. With a large accumulation of sludge, it is recommended to clean manually.

 

CHLORINERATOR SALT

Which is better to use? The best choice is rock (food) salt. For example, table salt is a protection against hard water, but the cost is unjustified; the use of iodized salt is also not recommended, as it gives a deep yellow color of water when in contact. Salt is added once (before changing the water), calculation: 3 kg of salt per 1000 liters of water.



 

 

 

 

 

 

 

 

 

 

We accept PayPal only We ship to Ebay's address only. Please make sure your address in EBAY is matched with your shipping  address  before you pay.

We offer FREE shipping on all orders! Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it 14 - 30 days after dispatch). Your items will be delivered with tracking number. In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.

If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 60 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Buyer pays for returns.