Item Description
It is a fully functional product. It is a product that has been used for a long time, but it is a beautiful product in good condition. It is a very good item for those who want things.
■This is a Sansui 3-way 2-way channel divider.
■I think this CD -5 A, which is a rare and rare device and can be said to be a late CD -5, is fine. The distribution volume of CD -5 A is less than that of CD -5. I think this CD A is in a good condition for existing CD -5 A.
■This is a 3-way and 2-way electronic crossover divider.
■After all, this is the ultimate multi-amp driven system for audio, and this is the golden age of audio. It's a device with gold inside, and the knobs and exterior design are elaborate, so you can enjoy the satisfaction of owning it audibly.
■The four original legs and switches with crossover cutoff characteristics of 6 dB/oct and 12 dB/oct (high HIGH, low LOW, independently switchable) are attached to the bottom.
■The light indicator lights up normally.
■There is no smoking, strange smell or stickiness at all.
■The crossover frequency can be selected from eight levels (four levels between the low and middle frequencies and four levels between the middle and high frequencies) by switching the two rotary switches. Therefore, the crossover frequency can be used in both the 2-way method, which divides the low and middle frequencies, and the 3-way method, which drives the low, middle, and high frequencies with the respective power amplifiers.
■The cutoff characteristics can be switched to 2 levels, 6 dB/oct or 12 dB/oct, depending on the speaker's characteristics and preferences, and can be switched independently for both the high and low frequencies.
■The left and right outputs of the mid and high frequencies each have their own level control.
■Equipped with a direct terminal, it is also possible to compare the electronic crossover method with the standard method (network).
■Type 2ch/3ch channel divider
■Rated output 2 V
■Total Harmonic Distortion 0.3%
■Hum and noise -70 dB
■Constant loss 3dB
■Input Impedance 100 kΩ
■Load impedance 10 kΩ
■Frequency switching 200 Hz, 340 Hz, 560 Hz, 900 Hz, 2 way high, 2 way low,
■2.5 kHz, 3.6 kHz, 5 kHz, 7 kHz
■Frequency error ± 20%
■Crossover cutoff characteristics: 6 dB/oct, 12 dB/oct (single high/low switchable)
■Crossover attenuation 3 dB
■Dimensions Width 166 x Height 127 x Depth 278 mm
■Weight 2.7 kg
■This is a Sansui 3-way 2-way channel divider.
■I think this CD -5 A, which is a rare and rare device and can be said to be a late CD -5, is fine. The distribution volume of CD -5 A is less than that of CD -5. I think this CD A is in a good condition for existing CD -5 A.
■This is a 3-way and 2-way electronic crossover divider.
■After all, this is the ultimate multi-amp driven system for audio, and this is the golden age of audio. It's a device with gold inside, and the knobs and exterior design are elaborate, so you can enjoy the satisfaction of owning it audibly.
■The four original legs and switches with crossover cutoff characteristics of 6 dB/oct and 12 dB/oct (high HIGH, low LOW, independently switchable) are attached to the bottom.
■The light indicator lights up normally.
■There is no smoking, strange smell or stickiness at all.
■The crossover frequency can be selected from eight levels (four levels between the low and middle frequencies and four levels between the middle and high frequencies) by switching the two rotary switches. Therefore, the crossover frequency can be used in both the 2-way method, which divides the low and middle frequencies, and the 3-way method, which drives the low, middle, and high frequencies with the respective power amplifiers.
■The cutoff characteristics can be switched to 2 levels, 6 dB/oct or 12 dB/oct, depending on the speaker's characteristics and preferences, and can be switched independently for both the high and low frequencies.
■The left and right outputs of the mid and high frequencies each have their own level control.
■Equipped with a direct terminal, it is also possible to compare the electronic crossover method with the standard method (network).
■Type 2ch/3ch channel divider
■Rated output 2 V
■Total Harmonic Distortion 0.3%
■Hum and noise -70 dB
■Constant loss 3dB
■Input Impedance 100 kΩ
■Load impedance 10 kΩ
■Frequency switching 200 Hz, 340 Hz, 560 Hz, 900 Hz, 2 way high, 2 way low,
■2.5 kHz, 3.6 kHz, 5 kHz, 7 kHz
■Frequency error ± 20%
■Crossover cutoff characteristics: 6 dB/oct, 12 dB/oct (single high/low switchable)
■Crossover attenuation 3 dB
■Dimensions Width 166 x Height 127 x Depth 278 mm
■Weight 2.7 kg