Zebra HC100 Thermal Network Wristband Printer with PSU and USB Cable .

Very good working condition.

Before connecting printer to PC download and install ZDesigner driver from Zebra website .   After printer is installed and connected go to Control Panel- Devices and Printers , right click on Printing preferences, Advanced Setup- Tracking Mode set to Mark Sensing.

When setting label in ZebraDesigner software choose Orientation - Landscape, in Label Dimensions window set label Width which is not total width but PRINTABLE width. Sum of Label Margins and Printable Width should amount 279.4mm. (Depending on labels used).

Example: Printable width 200.4mm, empty margin from Left 35mm, empty Margin from right 44mm, then 200.4+35+44=279.4 .

Label size is taken from cartridge chip and calibration not required.

If you need express delivery- please choose this delivery option from drop down menu when paying for the item.

Some troubleshooting tips:

If printer installs but when you send print job - nothing happens.
 Go to Control Panel - Devices & Printers - Right click on printer- choose Remove. Turn printer Off then On again. Wait until printer will  install again, go to Printer Preferences- Options-set label size- Tools- Run Calibration and  try to print delivery label again. Don't print Windows test print. If unsuccessful - repeat procedure until Windows install printer correctly or can try through Device Manager-Printers- Uninstall.
 If printer prints empty labels.
First off all make sure that labels are loaded facing up. 
Use labels supplied with printer. Some labels are designed for Thermal Transfer only- they work with ribbon only.
If printer is printing empty label after printing correct one- Run Calibration.
 Any other problems- please contact me. My details in Business Details at the bottom of listing.

To install as a network printer connect printer to your router, then go to Control panel- Add printer-Network printer- Choose Printer isn't on a list- Add a printer using IP address- type in IP address from the label on side of printer- Device type-Print Server-Choose printer from a list- Install, configure- Add label size, calibrate and you are ready to go.


If you need VAT invoice please send me your email address as eBay is not allowing to send .pdf file through eBay messaging service.