3D Drucker Filament Trockner Für Trocken halten Aufbewahrungsbox Filament-Halter

Sovol Filament Dryer

Sovol Filament Dryer is designed for drying filament, it is able to remove the moisture from the filament and restore the good printer quality of filament. As we all know, the filament is easy to absorb the moisture in the air, after the filament get humid, you may have the print issue such as strings, bubbles, uneven extrusion lines and unable to get good print quality no matter how perfect is your printer. Even the hot end may get clogged, that is really disppointing. Therefore, the filament dryer, is very essential for every 3d printer owners. For such an important accessories, we gave it more better features as we can. 

Sovol Filament Dryer Box Supports 2 Spools of Filament Drying &Printing

 

Large Capacity: 

Compared to other filament dryer, Sovol filament dryer can store 2 spools of filament  with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Which is a very good news for 3d printer owners, it satified more people who have more different demands, like people who usually print with 2-3 kg roll, people who have two or more single extruder 3d printer, people who have IDEX 3d printer. 

Sovol Filament Dryer Box Supports 2 Spools of Filament Drying &Printing

 

Adjustable Temperature & Time:

The temperature and time both are adjustable, when you hit the function button , you can set the temperature 40 c, 45c or 50c, hit up button to adjust the temp. When you hit the function button again, you can set the time from 6h to 12 h, hit the up botton, you can adjust the drying time. 

Sovol Filament Dryer Box Supports 2 Spools of Filament Drying &Printing

 

Humidity Display:

The humidity will show the humidity of the filament dryer box real-time, it is very convenient for users to take a reference about the humidity of the filament. 

 

 

Excellent Sealing Storage Function:

There is a transparent silicone spacer in the edge of the box, after you lock the lid and close the 2 teflon outlets, the filament can be stored in an vacuum enviroment for a long time, no need power on. We suggest you put 4 bags of desciccants  (not included in the package) inside the dryer box to improve drying efficience & quality. 


Two Teflon Outlets: 

There are two outlets made with teflon material, which makes the filament be loaded more smooth from the filament dryer to the extruder. And when you use the filament dryer for storing filament, you can close these two outlets, when you use it for drying, you can open it for letting the moisture flow out to the air. It is a little design, but make the product much special. 

Sovol Filament Dryer Box Supports 2 Spools of Filament Drying &Printing

 Two Locking Clips:

Two locking clips can lock the lid very tight, and gurantee that lip won't pop up because of the pull strength of extruder when it is printing .  You can use the filament dryer as a filament holder and print without any worries.  

 Recommend Settings for Different Material

Using Notice


1. Dry the moisture filament 12-24 hours before printing, if it is very humid.

2.Open the two teflon outlets and the lid a little bit while drying,  let it it sit on the latch ends to allow to humidity to escape.

3. Please put the filament rolls in the correct position (watch the video)  to make the filament goes out more smoothly.

  1. Wir akzeptieren Paypal, Google Pay, Kreditkarte, Visa, MasterCard usw.
  2. Die Zahlung muss innerhalb von 7 Tagen nach Bestellung des Artikels erfolgen.
  1. Wir bieten standardmäßig kostenlosen Versand für den Versand von DE-Bestellungen an.
  2. Die Bearbeitungszeit der normalen Bestellung beträgt 1-3 Werktage. Bitte beachten Sie, dass einige Artikel möglicherweise einen längeren Versand- und/oder Lieferzeitraum erfordern und in den Produktaufzählungspunkten detailliert beschrieben werden.
  3. Unsere Standardversandart ist DHL.
  1. Wenn der Drucker bei der Lieferung nicht geöffnet werden kann oder beschädigt ist oder der Verkäufer die falschen Waren/Produkte sendet, die nicht übereinstimmen, können Sie innerhalb von 30 Tagen einen Antrag auf Rückgabe stellen und erhalten eine vollständige Rückerstattung.
  2. Bei 3D-Druckerprodukten bieten wir einen kostenlosen Austausch von Extruder-Kits innerhalb von 3 Monaten und eine 1-Jahres-Garantie für alle wichtigen Teile, einschließlich Motherboard, Motor, Bildschirmanzeige und Brutstätte. Bitte wenden Sie sich im Voraus an den Online-Kundendienst, um eine Rücksendung wegen Beschädigung zu beantragen.
  3. Für den zurückgegebenen Drucker übernehmen wir keine Versandkosten, wenn es sich nicht um das Problem des Druckers selbst handelt, und wenn die Rücksendung nach China erforderlich ist, übernehmen wir auch nicht die möglicherweise anfallenden Steuern.Außer aus logistischen Gründen, wenn der Kunde das Paket nicht wünscht / der Kunde das Paket direkt ablehnt / aus persönlichen Gründen nach der Lieferung zurücksendet (muss in einem neuen Zustand sein), müssen Sie möglicherweise die vom Verkäufer gesendeten Frachtkosten und die Kosten dafür tragen Paketrückgabe.
  1. Wir verkaufen nur Original Creality 3D-Drucker mit Markenlogo und Modell auf jeder Komponente.
  1. Wir helfen Ihnen gerne weiter! Bitte geben Sie uns 24 Stunden Zeit, um zu antworten.
  2. Bitte geben Sie so viele Informationen zu Ihrer Bestellung an. Die Bestellnummer, das Bild oder Video der falschen oder defekten Teile und der weiße Fertigungsbarcode, der auf der Druckerbasis angebracht ist, können Ihnen effizienter helfen.
  3. Bitte beachten Sie, dass sich die Antwort unseres Kundenbetreuers aufgrund von Feiertagen und Wochenenden möglicherweise verzögert.
PushAuction