m.2 Adapter NVMe PCIe M2 to SSD for Apple Laptop for Macbook Air Pro 2013 2014 2015 A1465 A1466 A1502 A1398 PCI-E x4
product description:
Brand: XT-XINTE
Colour: Black
specification:
Size: 23x14mm
Weight: 2g
Features:
To install NVME M.2 SSD, you need to pay attention to the following: First, you must upgrade the mac os to the new version of high sierra 10.13. The upgrade will automatically update the smc and boot rom versions of the mac to support the ssd of nvme. Secondly, you must not use the Mac's own network recovery software to install a new hard disk mac os, but to install through the u disk, (to make a 10.13.6 U disk Apple tool in advance), in order to identify the new hard disk. In addition to installation Be sure to format the disk to APFS format. If it is formatted as HFS, it will restart in the installation system interface, and then prompt the disk space is insufficient.
This riser card is suitable for converting 2280 (22 mm wide and 80 mm wide) PCIe x4 M.2 NVME hard drive to 2013 edition 2014 edition 2015 2016 2017 edition Apple MacBook AIR A1465 A1466 and 2013 edition 2014 edition 2015 edition 2016 Vintage Apple MacBook Pro A1398 A1502 and other notebook SSD solid state drives
This riser card + hard drive can replace the original hard drive of the following models:
2013 version MacBook Pro retina A1398 A1502 (ME864 ME865 ME866 ME293 ME294),
2014 version MacBook Pro retina A1502 A1398 (MGX72 MGX82 MGX92 MGXA2 MGXC2),
2015 version MacBook Pro retina A1502 A1398 (MF839 MF840 MF841 MJLQ2 MJLT2),
2013-2014 version MacBook Air A1465 A1466 (MD711 MD712 MD760 MD761),
2015 version MacBook Air A1465 A1466 (MJVM2 MJVP2 MJVE2 MJVG2) and Mac Pro ME253 MD878, iMAC A1419 (Late 2013 and newer).
Recommended SSD(not included):
for Samsung 970evo/pro, for SANDISK extreme Pro, for Lexar NM600, NM610, NM700, NM710, SN550, SN720, SN750, RD500 intel 760P, for Western Digital /HP /Kingston /Toshiba, etc. (M.2 NVME channel hard drive).
These hard drives are currently used by many customers (for WD SN550 /SN750, for Samsung 970evo)
Note: Not for Micron P1 /Plextor /Hynix /TECLAST /Kingston NV1 /Samsung 981, 981A. ( These SSD are completely unusable! )
note:
for Apple's 10.13 and later systems already support the M.2 NGFF SSD for the NVMe protocol.
The working principle of the adapter card is extremely simple. Just connect a few wires from your original hard disk and reconnect to the hard disk interface of the Apple notebook. There is no need for chip conversion in the middle, so there is no need to drive and it will not change any performance of your hard disk. !
The product contains:
5PCS OR 10PCS x adapter card
