Questions on product fitment or installation? We are happy to help! Contact Us
NOTE: Factory Ford emblem and Housing are NOT included with this kit. Camera only.
FITS 2009-2016 Super Duty. This camera is an affordable aftermarket replacement to Ford part number FC3Z-19G490-B, or FC3Z-19G490-C. It requires the vehicle to already have had a backup camera installed at the factory. This camera module will fit in your factory tailgate emblem housing and plug into the factory tailgate harness, just like a factory camera would. This camera uses a Super CMOS sensor so the picture quality is crisp, clear, and colorful just like your factory camera was! In fact, we even replicated the factory parking guidelines so you can continue to utilize that feature for added safety and convenience.
NOTE: HOUSING IS NOT INCLUDED WITH THIS CAMERA. It is possible that your Ford emblem will get damaged when removing it from the base during camera replacement on an early 2013 truck. You can buy the complete kit from us that includes the housing and emblem part number CS-FTRSDb-MOD-EH.
This kit comes with the following components:
Camera Details:
2009-2016 F series trucks with factory backup camera in the emblem. This kit will not work on trucks that did not come from the factory with a backup camera.
In mid 2013 (approximately May of 2013) Ford did an update on the housing and emblem design so that the emblem can be removed without breaking it. That being said if you have a mid year 2013 or older we recommend getting the entire housing/emblem assembly so that the new camera fits tight and everything goes together as it should.
To confirm you will need to check the driver's side door tag for your vehicle manufacture date. If that date is May of 2013 or really close it will be hard to tell which style of emblem and housing you have. In this scenario you may want to remove your emblem to determine if the mounting is the pin style(new) or s-hook style(old).
Or simply order part number CS-FTRSDb-MOD-EH, emblem and housing option, to receive the newest version of both.
Remove the old Ford emblem from your tailgate by gently prying the emblem from the base. Remove the two screws holding the base to the tailgate and it will expose the screws holding the factory camera in place. Disconnect the wire harness from the camera remove the camera from the housing. Install the camera in reverse order from the way it was removed. Plug the camera into the factory harness and screw the housing back on the tailgate. Once the camera has been tested replace the factory emblem... SIMPLE!
Questions about this item? Click here to contact us! ›
Please use the 'ask seller a question' button if your question is regarding the specifics of this item. If you have a general question for Camera Source please use the 'Contact Us' link at the bottom of this page.
Copyright © Camera Source. All rights reserved.eBay Template Design NinjaTemplates