Creality Ender 3 V3 SE 3D Printer, 250mm/s CR Touch Auto Leveling FDM 3D Printer with Sprite Direct Extruder, Dual Z-axis & Y-axis, Auto-Load Filament, Upgraded Ender 3, Print Size 8.66x8.66x9.84 inch
ππππ ππ πππ πππππππ - Creality Ender 3 V3 SE 3D printer is easy to put together in 3 steps. It uses CR Touch sensor for auto leveling and a strain sensor for auto Z offset, saving the need for a calibration card or knob screws. So easy to achieve a perfect first layer. Also, you can load or unload the filament with one tap. All set within just 20 minutes.
ππππππ ππππππππ & ππ-πππ πππππππππ - The market-proven “Sprite” direct drive extruder of Ender 3 V3 SE 3D printer ensures smooth and consistent feeding of PLA, PETG, and also flexible TPU, bringing more possibilities. The 32-bit silent mainboard uses an advanced stepper motor drive to control all axes more precisely for less operation noise.
πππππ & ππππππ ππππππππ - Ender 3 V3 SE 3D printer can print at up to 250mm/s speed with 2500mm/s² acceleration, allowing you to complete the models efficiently. The Optimized UI uses motion graphics to display the leveling process and other parameters, so you will know how the printer is doing at a glance.
π-ππππ ππππππ ππππ
ππ & ππππ π-ππππ - The rigid dual Z-axis lead screws reduce Z wobbling effectively. The Y-axis features two 8mm linear shafts made of strong and wear-proof steel, which underpins a steady and accurate motion of the build platform for a lasting time.
ππππ πππππ πππππππ πππ ππππ - Ender 3 V3 SE 3D printer takes up less space but brings an ample build volume. The PC spring steel build plate is sticky and flexible, making it easy to remove the printed models by bending it slightly. Thanks to the power loss recovery function, it can resume printing after an unexpected power failure, avoiding filament and time waste
Creality Official Ender 3 V3 KE 3D Printer, 500mm/s Max Printing Speed CR Touch Auto Leveling Upgraded Sprite Direct Extruder X-axis Linear Rail Print Size 220 * 220 * 240mm
Before applying power, please check the input voltage (230V115V required) and adjust it to meet your need, to avoid damage to the machine.
γ500mm/s Max Printing SpeedγCreality Ender-3 V3 KE supports a maximum printing speed of 500mm/s, 8000mm/s² acceleration, which can print faster while keeping the print quality, saving 86% of the time compared with other printers.
γSmart UI, Self-test with One TapγResponsive touch UI with an intuitive tab bar, smart self-test for Z offset, auto leveling, and more with just one tap, Real-time model preview, and vivid motion graphics of printing parameters.
γX-axis Linear Rail, Ultra-smooth MotionγThe precise linear rail on the X-axis has a carriage slide containing ball bearings, together with the dual Linear Shafts on Y-axis and dual X-axis Lead Screws, making each move accurate, steady and frictionless ( 0.04 friction coefficient), built out of stiff steel, it will stay as new even after long-time use.
γHotend with 60W Ceramic Heaterγ60W ceramic heater, able to fully melt filaments for high-speed printing, Bi-metal heatbreak, effectively preventing thermal creep, Copper nozzle, enabling 300 β printing with handle Hyper PLA, PETG, ABS,TPU(95A) and ASA filaments.
γ4010 Model Cooling Fans on Two SidesγEnder-3 V3 KE features the 4010 model cooling fan on each side of the printhead, which cools the freshly printed section rapidly and evenly, keeping your printers always in good shape.
Creality CR-10 SE 600mm/s High Speed 3D Printer CR Touch Auto Leveling 300β Hardened Steel Nozzle 4.3-Inch Touch Screen X and Y-Axis Precision Guide Rails Flexible PEI Printing Substrate 220x220x265mm
[Automatic Leveling, Perfect First Layer Quality] - The leveling and Z-offset of the Cr-10 SE are fully automatic, eliminating the need for manual calibration to achieve neat, smooth, and even first-layer printing.
[High-speed Printing, Smooth Operation] - The 3D printer prints at speeds up to 600mm/s with an acceleration of 8000mm/s², enabling print jobs to be completed in a shorter period of time.
[Precision Linear Guides for X-axis and Y-axis] - Precision, frictionless and made of durable steel, the ball-bearing linear guides bring long-lasting accuracy and stability to the X-axis and Y-axis.
[Upgraded Sprite Direct Extrusion] - The 60W ceramic heater and bimetal (copper + titanium alloy) insulation around the hot end provide smooth extrusion, smooth wire feed, and no clogging, even at high flow rates.
[Efficient Model Cooling Fan] - Creality CR-10 SE is equipped with a 12,000rpm fan that instantly cools the freshly printed model part with strong wind power to provide better bridging and overhanging effects.
[Algorithm for Fine Print Quality] - Printer vibration is mitigated by input shaping to minimize ringing or ghosting, and feed flow is optimized by motion advance to reduce paper clumping and bleed-through.
[Compatible with a Wide Range of Filament] - The cr 10 se is compatible with PLA, PETG, ABS, and TPU, and works well with high-temperature and abrasion-resistant filaments such as PA and PLA-CF.
Creality K1 3D Printer - 600 mm/s High-Speed, Upgraded 0.1 mm Smooth Detail, Auto Leveling, Dual Fans Cooler, Straight Out of The Box for Beginners, Printing Size 8.66x8.66x9.84 inch
Rapid Printing: The Creality K1 3D printer is built for speed, reaching up to 600mm/s and 20000mm/s² Acceleration. Reaching 200β in just 40 seconds. That's 12 times faster than regular FDM 3D printers. Perfect for professionals and beginners.
Effortless Auto-Leveling: Achieve perfect prints effortlessly with one-tap auto-leveling and dual cooling systems. The Creality K1's innovative design, including a large drum fan and simulated wind tunnel, ensures accurate leveling. An 18W turbofan allows unsupported printing of complex structures.
Solid Unibody Frame: The G-sensor and die-cast frame parts of the Creality K1 eliminate ringing, ensuring steady printing. CoreXY structure, along with an auxiliary cooling fan, adds stability and vibration resistance even at high speeds. Z-axis control reduces layer lines for smoother 0.1mm detailed prints.
Connected and Carefree Control: Creality K1 can print via USB drive or WiFi. Creality K1 can be controlled or monitored* remotely from Creality Print or Creality Cloud APP/WEB. Also allowed when many K1 printers are online. Once the printing is complete or abnormal, a notice will be sent to your phone or PC. No more close watch.
Creality K1 Max 3D Printer, 600mm/s Max High-Speed 3D Printers with Auto Leveling, Dual Cooling, Smart AI Function and Out-of-The-Box, Large Printing Size 11.8x11.8x11.8in
600MM/S HIGH-SPEED PRINTING - The Creality K1 Max 3D printer is designed for efficiency, boasting a maximum speed of 600mm/s and 20000mm/s² Acceleration, which is 12 times faster than a regular FDM 3D printer. Perfect for professionals and beginners.
11.8x11.8x11.8in LARGE PRINTING SIZE - The K1 Max boasts an impressive printing size of 300×300×300mm, allowing for multiple models to be printed simultaneously, significantly increasing printing efficiency. Additionally, its print volume to printer size ratio can reach up to 25.5%, the biggest compared with similar-sized printers.
SMART AI LIDAR & CAMERA - The 1μm resolution LiDAR will scan the first layer on its own. It will pause printing and tell you immediately if something goes wrong. And K1 Max uses an AI camera to watch over spaghetti failure, foreign objects, debris, etc. It will alter you when an error occurs. It also supports real-time monitoring and creates time-lapses for sharing. Furthermore, The strain sensors in the heatbed generate an accurate leveling mesh for auto compensation.
OUT-of-THE-BOX - K1 Max is assembled and calibrated before shipment, and it offers a boot-up quick guide, and allows self-test with one tap. So, users can print right out of the box. The Creality K1 Max offers hands-free auto leveling, the strain sensors in the heatbed deliver hands-free leveling, while the AI LiDAR scans the bed tilt at million points for more precise leveling. Its heatbed heats to 60β in just 90s. Ensuring perfect prints every time without the hassle.
32mm³/s FlOW & DUAL COOLING - A new ceramic heater encircling the hotend can melt various filaments instantly. The dual-gear direct drive extruder and titanium alloy heatbreak ensure 32mm³/s full-blast feeding flow in up to 300β. The freshly printed model is cooled rapidly by two fans, one on the printhead with directional air ducts, and another in the build chamber. The model hardens before any stringing and warping could happen