* Standard with VECT, MAX, MACH-II, MACH, HIT, TOP-IV, TWIN-TOP Series Robots
PENDANT OVERVIEW
The HYNC-200 provides simplified motion control for sophisticated injection-molding automation using a soft-button keypad with an LCD Screen. Each Mode Selection Step will easily allow for the take-out automation of molded parts and minimizes your set up time, thus maximizing your profit.
Palm Style handheld control pendant with soft keypad and LCD Screen
Features Magnetic Back Plate to reduce drops or damages
Developed specifically for the molding industry by automation engineers with years of experience in the field
Programming requires no special skills or knowledge with mode selection procedures or saved motion pattern in the control
Manual, Step-by-Step, and Auto operations (1 Hour Training Course)
Mold take-out Routine is made by mode selection method in Programming
Individual Timer is set up for precise operation of the robot
LCD screen shows Counter, Input & Output signal, program steps, and timer control
Minimal floor space required - handy control pendant mounts to small spaces on molding machines with body-attached control box
Selectable sprue placement during outbound or return traverse motion
Selectable posture control at product extract side
Selectable fixed mold half or moving mold half product extraction
Conveyor or secondary equipment start signals
Defective product rejecting circuit
Servo Axis has a function for stacking on conveyors
Robot Ejector control can be selected for maximum productivity
Undercut feature installed inside of the mold to get away from the core
Vertical Swivel or External Nipper operation is possible with an optional mechanism
Mold Manager can save up to 99 new molds
Position with Servo Motor can be set with Jog Button
English Manual ensure all operation and maintenance
Controller Overview
1. MANUAL MODE
Soft-Button Key Pad operates the Servo and Pneumatic Operations
Manual Operation Speed can be set up and managed
2. STEP MODE
Take-Out Side: Nozzle, Clamp, Parts Drop: Conveyor or In-Mold
U-Style or L-Style Motion, etc.
Over 100 Program Selections to choose from with Mode Selection Method - including horizontal stacking
After selecting your mode, 1 step-by-1 step can be operated
One high-speed cycle without molding machine can be operated (the mold needs to be open with the safety door closed)
3. AUTO MODE
Pressing the "Auto" button will activate automatic operation between the sprue-picker and the molding machine
If/when the safety door is closed, the molding machine is in Auto mode, the mold closes and opens, then the robot arm will start moving
After recovering from an alarm, press Auto mode to go back to the Home Position to wait for the next command/program
4. EASY MAINTENANCE AND I.O.
The I.O. Screen will display whether each Input and Output is on or off
Sealed NSK Motion guide does not require grease for a long time