The DeFelsko Positector FNDS1-G Duplex Standard Coating Thickness Gauge, 60 mils is a precise, rugged tester designed to measure coating thickness on all metals accurately and quickly using magnetic or eddy current principles. The PosiTector 6000 FNDS probe measures the individual thicknesses of both the paint and the zinc layers in a duplex coating system with a single reading. Duplex coating systems use a combination of two corrosion protection systems – typically paint or powder coating over galvanized steel (hot-dip, electro or zinc spray metalizing). The resultant corrosion protection is superior to either protection system used independently. In Duplex mode, the PosiTector 6000 FNDS utilizes both magnetic (ferrous) and eddy current (non-ferrous) principles simultaneously to calculate and display the individual paint and zinc layer thicknesses. The magnetic principle is used to measure the combined paint/zinc thickness over the ferrous substrate, and the eddy current principle is used to measure the paint thickness over the non-ferrous zinc coating. The zinc thickness is calculated by subtracting the paint thickness from the combined paint/zinc thickness measurement. The DeFelsko FNDS1-G Positector 6000 FNDS1 Standard Coating Thickness Gauge has a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 1,000 in one group memory reading storage capacity and USB data output.
High contrast, reversible color LCD | 1,000 in one group |
High contrast, reversible color LCD | Magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) |
Display | High contrast, reversible color LCD |
Data Output | IR & USB - "3" Models Bluetooth - "3" Models |
Surface Temp. | Maximum 120 °F / 49 °C |
Power | 3 AAA batteries, Included |
Dimensions | 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) |
Weight | 5.8 oz. (165 g) without batteries |
Protection Class | Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant |
Warranty | 2 Years |
Calibration Certificate | Certificate of Calibration showing traceability to NIST included |
Min. Concave Radius | 1 inch (2" OD) |
Kit Contents | All Gauges are supplied as a complete kit including precision plastic shims, protective rubber holster with belt clip, wrist strap, 3 AAA alkaline batteries, instructions, nylon carrying case with shoulder strap, protective lens shield, Long Form Certificate of Calibration traceable to NIST, USB cable, two (2) year warranty. |