eBay

Driver ID keypad provides a secure driver authentication system to prevent theft.
The keypad can be connected to leading GPS devices such as: Teltonika, Cellocator, Digital Matter and more.

The keypad is used for Driver ID input within the scope of the driver authentication feature of the tracking unit. The driver enters a Driver ID, which is transferred to the tracking unit and used for deactivating the vehicle immobiliser and informing the back office application.

The keyboard supports the following main capabilities:
Driver ID of up to 12 digits in length (0-9 followed by star (*)).
Background light allowing convenient operation at night.
Audible indication for dialling process.
Visual indication when the Driver ID is transmitted.
Transmits the Driver ID to the tracking unit via 1-Wire® protocol simulating the DS1990A Serial Number iButton operation.
Designed for vehicle environment with low power consumption.

Specifications

Supply voltage for the 24v: 20 V – 28 V

Supply voltage for the 12v: 8 V – 16 V

Current consumption: < 5 mA typical

Protection: Inverted polarity

Communication protocol: 1-Wire® protocol supporting DS1990A Serial Number iButton

Communication distance: 10 meters maximum

Dimensions : 55mm x 44mm x 23mm

Working Temp: -20ºC to 70ºC

Wire length: 150 cm

The keypad Interfaces
The following table presents the keypad interfaces. For each interface the wire,functionality and recommended connection is described.

WireName	WireColor	interface	Functionality	Connection
Power	Red		Powering the keyboard	Vehicle power supply
Ground	Black		Powering the keyboard	Vehicle ground
Buzzer	Green	Pulled downinput	Control of the vocalindication (buzzer)	GPS unit output
Door	Blue	Pulled up input	Activate the backgroundlight	Vehicle doors
Data	Orange	1-Wire®protocol	Communication with theGPS unit	GPS unit Dallasinterface

* Manual will be sent upon request