Custom-designed drivers reduce bad vibrations

Revel designs and builds every driver that goes into their speakers. The M106's 6-1/2" woofer uses an aluminum cone that's anodized on both sides with a micro-ceramic composite compound. This reduces resonances that can color the sound. 

The M106's 1" aluminum dome tweeter sits in Revel's concave Acoustic Lens waveguide, which increases the tweeter's dispersion at higher frequencies, and also helps create a more seamless match between the tweeter and the midrange driver just below it. The result is very smooth, consistent sound both on-axis and off-axis, creating a larger sweet spot.

Curved cabinet walls cut down on colorations

Despite its compact size, the M106's cabinet walls are a full 1" thick, with the curved side and back walls laminated from single contiguous layers for consistent resonant behavior. These curved walls are inherently stiffer than conventional box shapes, and are reinforced by extensive internal bracing that eliminates enclosure-induced colorations.

The M106 employs a rear-firing bass-reflex port with identical flares on both ends. This boosts low-frequency output while minimizing dynamic compression and port noise. A foam port plug is included which you can insert to optimize bass response when placing the speaker in a bookshelf or up against a wall.

Tested by instrument and by ear

Revel's world-class speaker design and testing facility features an anechoic chamber and the latest high-tech measurement gear. But some of their most critical test instruments are the ears of their trained listening panel. When working on a new design, Revel's engineers set up a series of controlled auditions comparing their design to several competing speakers.

Speakers under comparison sit on a rotating platform, and each model is moved into the identical position by a computer-controlled belt drive system. An acoustically transparent screen hides the speakers from the listeners to avoid visual bias. These double-blind listening tests provide an essential reality check, and help the engineers correlate measurements with what listeners actually hear and prefer.

Build a complete Revel system

A pair of M106s can fill your room with spacious, 3-dimensional stereo sound. If you're interested in a voice-matched surround sound system, check out these other models from Revel's Performa3 series:
Center channel: Performa3 C208
Surround speaker: Performa3 S206
Subwoofer: Performa3 B112

Who is Revel?

Revel is one of the high-performance audio companies of global electronics giant Harman International. Since 1996, Revel has used cutting-edge design tools and one-of-a-kind testing facilities to develop speakers that measure well and sound amazing. The intensive design work happens at Harman's state-of-the-art speaker R & D facility in Northridge, California.

• 1" aluminum dome tweeter with proprietary acoustic lens and waveguide for consistent dispersion over a wide listening area
• 6-1/2" anodized aluminum cone woofer with cast frame for reduced resonance
• ribbed aluminum woofer cone achieves piston-like behavior eliminating major sources of resonance
• advanced high-order crossover optimizes timbre accuracy both on axis and throughout the room
• cabinet has 1"-thick walls built up from curved laminated layers, plus extensive internal bracing
• bass-reflex (ported) cabinet with rear-firing port
• low-frequency extension: 59Hz (-3dB), 54Hz (-6dB), 39Hz (-10dB)
• sensitivity: 87 dB
• impedance: 8 ohms
• recommended amplifier power: 50-150 watts
• gold-plated binding post speaker terminals
• includes a foam port plug for adjusting the speaker's low-frequency performance
• removable grille is magnetically attached
• 8-1/4"W x 15-1/16"H x 11"D
• weight: 18.5 lbs.