Rubber Lined P Clips
P clips are used extensively in many industries for securing pipes, hoses, and cables.
The EPDM liner enables the clips to clamp the pipes, hoses, and cables firmly without any possibility of chafing or damage to the surface of the component being clamped.
EPDM is chosen for its resistance to oils, greases, and wide temperature tolerances.
The P Clip band has a special strengthening rib which
keeps the clip flush to the bolted surface.
The fixings holes are pierced to accept a standard M6
bolt, with the lower hole being enlarged to allow for any adjustment that may
be necessary when lining up the fixing holes.
Product Details:
Materials:
Band:Mild steel zinc plated W1
Easy Cable management
Easy to use
Rubber lined to reduce any Chafing or damage to the components, it holds
Special Strengthening rib to keep the clip
flush to the bolted surface
Quantities:
Sold in boxes of
165's
Box Content
| Clamp Size | Quantity |
|---|---|
| 5.0mm | 20 |
| 6.0mm | 20 |
| 8.0mm | 20 |
| 9.0mm | 15 |
| 10.0mm | 15 |
| 12.0mm | 15 |
| 13.0mm | 10 |
| 14.0mm | 10 |
| 16.0mm | 10 |
| 18.0mm | 10 |
| 20.0mm | 10 |
| 21.0mm | 10 |
Additions:
The Flexi Driver is an indispensable tool for installing clamps, thanks to its long reach and flexible neck. Please refer to the link below for more information on.
Other Version:
We Also offer a Stainless Steel for the higher grade in materials and a yellow zinc plated versions for the vintage look and a lower price
How To Install:
Find a place you want to hang it.
Make sure you have a m6 screw
and screwdriver or flexi driver.
Line up the holes and place the M6 screw in the holes.
Screw it in to the location you have decided.
How To Decide on The Size:
Always measure the outside (O.D) of the hose, not the internal diameter (I.D), then match the outside diameter of the hose to the inside diameter of the clamp. If the hose is 10mm outside diameter, use a 10mm clamp.
How To Remove:
Get your screwdriver or flexi driver.
Undo the screw and remove the Clip.